E3S-LS3N Datasheet, PDF (2/2 Pages) Omron Electronics LLC – Printed Circuit Board Sensor

Rating/performance
Sensor
Limited reflective
Item
Sensing
Model
E3S-LS3N
White art 20 to 35 mm
Black paper 20 to 30 mm
E3S-LS3NW
10 to 60 mm
15 to 50 mm
Light source
(wave length)
Red LED (660 nm)
Power supply voltage 12 to 24 V DC ±10%, ripple (p-p) 10% or less
Current consumption 25 mA max.
Control output
Load supply voltage: 24 VDC or less; load current: 50 mA or less
(residual voltage 1 V or less); NPN open collector output type
Response time
Operation or reset: 1 ms max.
Ambient illuminance Incandescent lamp: 5,000 lux max.
Ambient temperature Operating: -10° to 55°, Storage: -25° to 70°C (with no icing or condensation)
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Operating: 35% to 85%RH, Storage: 35% to 95%RH (with no condensation)
20 M W min. at 500 VDC
1,000 VAC at 50/60 Hz for 1 minute
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Protective structure IEC Standard IP40
Connection method Pre-wired models (standard length: 2 m)
Weight (Packed state)
Case
Material
Lens
Accessories
Approx. 50 g
Heat-resistant ABS resin
Acrylics
Instruction manual
* At 80 x 80 mm
Characteristic data (typical)
Detection range - material properties
E3S-LS3N/E3S-LS3NW
90
E3S-LS3N
80
E3S-LS3NW
70
60
50
40
30
20
10
0
Material
Output Circuit Diagram
NPN output (PNP output will be available soon)
Model
Operating
status of output
transistor
Timing chart
E3S-LS3N
E3S-LS3NW
Light ON
Incident
Interrupted
Operation indicator ^ON
(orange)
OFF
Output
transistor
ON
OFF
Output circuit
Operation
indicator
(orange)
Main
circuit
Brown 12 to 24 VDC
Black
Z
Blue
Load
OUT
0V
Dimensions (Unit: mm)
E3S-LS3N
E3S-LS3NW
Operation indicator (orange)
10
16.5
34
19
5.3
Two, M3
28
mounting holes
3
"Vinyl-insulated round cable of 4 dia.
3 cores conductor cross-sectional area:
0.12mm²; insulation diameter: 1.2 mmStandard length: 2 m"
12.3
Mounting Holes
Two, 3 dia.
28
Emitter
Receiver
CAD file
E3S_51
E3S-LS3N
A-291