DCA1-5C10 Datasheet, PDF (2/4 Pages) Omron Electronics LLC – T-branch Taps and Terminal-block Terminator

Peripheral Devices
Peripheral Devices
Connectors for DCN1-jC
Model
MSTB2.5/5-ST-5.08-AU
MSTBP2.5/5-STF-5.08-AB AU SO
Comments
For node connection
For T-branch Tap connection (with screws
to secure the connector)
Manufacturer
Phoenix Contact Corporation
Phoenix Contact Corporation
Specifications
Ratings/Characteristics
Rated current
Insulation resistance
Dielectric strength
Ambient temperature
Between main lines:
8 A (power supply line) and 2 A (signal line)
Between main and branch lines: 3 A (power supply line) and 1 A (signal line)
100 MW min. (at 500 VDC)
500 VAC for 1 min, leakage current: 1 mA max.
Operating: 0°C to 55°C
Materials
Item
Component
Unit
Main and Expansion Units
DIN track lock
Terminal block connector (see note)
Housing
Contact
PCB
Note: The DCD1-1C is a product of Phoenix Contact.
Materials
PBT resin with glass (UL14V-0)/gray
POM resin/yellow
PA66 resin (UL94V-0)/gray
Phosphor bronze coated with gold
Glass epoxy resin
Dimensions
Note: All units are in millimeters unless otherwise indicated.
DCN1-1 (With No Branching Connector)
DCN1-1C (With Three Branching Connectors)
Internal Circuit
*(See
note)
Main line
Main line
Socket for terminator connection
Mounting Dimensions
Two, 4 dia. or M4
Branch line
Terminal no.
1
2
3
4
5
V--
CAN-L
DRAIN
CAN-H
V+
Note: When connecting a branch line to the main line, connect the main line to the connector marked with an asterisk because the resistance
between the asterisked portion is minimal.
137