D2FW-G_12 Datasheet, PDF (2/4 Pages) Omron Electronics LLC – Single-point mounting with an M4 screw

D2FW-G
M4 Mounting Sealed Basic Switch
Characteristics
Mounting Holes (Unit: mm)
Item
Model D2FW-G2 models
D2FW-G0 models
Permissible operating speed
1mm to 500mm/s
Permissible
Mechanical
operating frequency _Electrical
120 operations/min
30 operations/min
Insulation resistance
Contact resistance (initial value)
100 MΩ min. (at 500 VDC with insulation tester)
100 mΩ max.
150 mΩ max.
Between terminals of the same
polarity
D
2
Dielectric strength
Between current-carrying metal
parts and ground
F
W
Between each terminal and
non-current-carrying metal parts
G
Vibration resistance
*1
Malfunction
600 VAC 50/60 Hz for 1 min
1,500 VAC 50/60 Hz for 1 min
1,500 VAC 50/60 Hz for 1 min
10 to 55 Hz, 1.5 mm double amplitude
Shock resistance
Durability
Malfunction * 1
1,000 m/s² {approx. 100G} max.
300 m/s² {approx. 30G} max.
Durability * 2
Mechanical
Electrical
300,000 operations min. (60 operations/min)
30,000 operations min. 100,000 operations min.
(20 operations/min)
(20 operations/min)
Degree of protection
IEC IP67
Ambient operating temperature
-40°C to +85°C (at ambient humidity 60% max.)
(with no icing or condensation)
Ambient operating humidity
Weight
95% max. (for +5°C to +35°C)
Approx. 10.4 g (for SPDT model)
Note. The data given above are initial values.
*1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel
Position value for lever. Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.
M4 Tap
16
4⁺_00.1 dia. holes
(depth: 2mm min.)
Dimensions (Unit: mm) /Operating Characteristics
The @ is replaced with the code for the ratings and the contact forms. See the "List of Models" for available combinations of shapes.
●Leaf lever
D2FW-G#7#M
t0.2 Stainless-steel lever
㸦22.8㸧
16±0.15
A
282
5
Operating Characteristics
Type
Leaf lever
Model
D2FW-G#7#M
4.2^+00.2 dia.
4^+00.2 dia.
R3.5
D2FW㸫G
4
0
0.15
dia.
5
Free
Position
Operating
Position
13.5
Operating Force
Releasing Force
OF Max.
RF Min.
Overtravel
OT Min.
Movement Differential MD Max.
Free Position
Operating Position
Total Travel Position
FP Max.
OP
TTP
2.45N {250 gf}
0.29N {30 gf}
1.0 mm
1.0 mm
15.5 mm
11.5±2 mm
6.5 mm (reference value)
Lead wire
COM AVS0.5 (Black)
NO AVS0.5 (Blue)
NC AVS0.5 (Red)
4.7
15.3
23.5
300±10
㸦5㸧
●Long leaf lever
D2FW-G#8#M
t0.2 Stainless-steel lever
4.2^+00.2 dia.
4^+00.2 dia.
R3.5
㸦19㸧
16±0.15
A
D2FW㸫G
4
0
0.15
dia.
5
Free
Position
Operating
Position
13.5
282
5
Operating
Characteristics
Type
Model
Operating Force
Releasing Force
OF Max.
RF Min.
Overtravel
OT Min.
Movement Differential MD Max.
Free Position
Operating Position
Total Travel Position
FP Max.
OP
TTP
Long leaf lever
D2FW-G#8#M
2.94N {300 gf}
0.59N {60 gf}
1.0 mm
1.0 mm
19 mm
12±2 mm
8.5 mm (reference value)
300±10
Lead wire
COM AVS0.5 (Black)
NO AVS0.5 (Blue)
NC AVS0.5 (Red)
4.7
15.3
23.5
㸦5㸧
Note1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note2. The operating characteristics are for operation in the A direction ( ).
2