3S4YR-HNF Datasheet, PDF (2/6 Pages) Omron Electronics LLC – Manual Swipe Magnetic Card Reader

3S4YR-HNF
3S4YR-HNF
Specifications
Part number
Recommended card type
Recording method
Swipe direction
Communication protocol
Card feeding speed
Interface connector
Mounting location
Power supply
Current consumption
Ambient temperature
Ambient humidity
Vibration endurance
Shock endurance
Cable length
Dimensions
Weight
Service life
Operation
Storage
Operation
Storage
HNF
ISO 7810, 7811-1 to -5, 7812 & 7813
F2F
Reads in either direction
Unidirectional (response only) or Bidirectional (command/response)
100 to 1,000 mm/sec. (200 to 1,000 mm/sec. for 3 track stripe card)
D--sub 9--pin (female) Bidirectional units also have PS/2 connector (mini-din 6-pin)
Indoors; away from rain, sunlight and dust
Unidirectional: powered from RS-232C port
Bidirectional: powered from keyboard port
Unidirectional, 12 mA dual track, 16 mA triple track
0 to 45_C (32 to 113_F)
--15 to 60_C (5 to 140_F)
30 to 85% RH, with no condensation and absolute air humidity of 23 g/m³ or less
20 to 90% RH, with no condensation and absolute air humidity of 40 g/m³ or less
10 to 150 Hz, single vibration width of 0.15 mm or an acceleration of 19.6 m/s² (2 G)
196 m/s² (20 G)
1500 mm (59.06)
100 L x 38.6 W x 35.2 H mm (3.94 L x 1.52 W x 1.39 H in)
Approx. 185 g (6.53 oz)
300,000 passes minimum
I/O Information
J INTERFACE CONNECTOR
D-Sub 9-pin (female). Bidirectional uses 6-pin mini-din (male and female)
J INTERFACE METHOD
Conforms to EIA RS-232C
Transmission speed: 9600 bps
Communication method: Half-duplex
Synchronizing method: Start-stop synchronization
Data bit length: 8 bits
Error detection: Even parity
Stop bit: 1 bit
4