3F88L-RS17 Datasheet, PDF (2/6 Pages) Omron Electronics LLC – Cam Positioner

Specifications
3F88L-160/-162
General Specifications
Item
Model
3F88L-160
3F88L-162
Supply voltage
100 to 240 VAC, 50/60 Hz
Allowable supply voltage
85 to 264 VAC
Power consumption
27 VA max.
Inrush current
40 A at 10 ms max.
I/O power supply
145 mA at 24 VDC
Allowable I/O supply voltage 20.4 to 26.4 VDC
Insulation resistance
20 MΩ min. between all external AC power supply terminals and the protective ground terminal (at 500 VDC) *
Dielectric strength
2,300 VAC at 50/60 Hz for 1 min between all external AC power supply terminals and the protective ground
terminal (leakage current: 10 mA max.) *
Noise immunity
IEC 61000-4-4: 2 kV power line
Vibration resistance
Conforms to JIS C0911: 10 to 57 Hz with 0.075-mm single amplitude 80 min each in X, Y, and Z directions,
57 to 150 Hz at 9.8-m/s² acceleration (sweeps: 8 min × 10 sweeps = 80 min total)
Shock resistance
Conforms to JIS C0912: 147 m/s² three times each in X, Y, and Z directions
Ambient operating temperature 0 to 55°C
Ambient operating humidity 10% to 90% (with no condensation)
Ambient operating atmosphere No corrosive gases
Ambient storage temperature −20 to 75°C
Terminals screw size
Power supply input: M3.5, control I/O: M3
Momentary power interruption Does not detect momentary power interruptions lasting less than 15 ms.
detection time
Dimensions
110 × 100 × 82.5 mm (W × H × D)
Weight
1 kg max.
Structure
Mounted inside panel
Mounting method
Screw mounting (two M4 screws) or DIN Track mounting
* Disconnect the functional ground terminal from the protective ground terminal before performing insulation resistance or dielectric strength tests.
Characteristics
Item
Model
No. of outputs
Output performance
No. of banks
Display
Response speed
Detection cycle
Reproducibility
Memory backup
Control unit
Origin compensation
Backlash compensation
Advance angle compensation
Control inputs
Control outputs
Speed detection accuracy
3F88L-160
3F88L-162
16
32
Open-collector output, maximum switching capacity: 300 mA at 26.4 VDC (1.6 A max. per connector)
8 banks at 360 resolution, 4 banks at 720 resolution
7-segment LED (current bank, speed, current angle)
1,600 r/min at 360 resolution, 800 r/min at 720 resolution
100 µs max.
0.2°
No. of non-volatile memory (EEPROM) writes: 100,000 times
1/360 at 360 resolution, 1/720 at 720 resolution
1 to 359 at 360 resolution, 1 to 719 at 720 resolution
1 to 179 at 360 resolution, 1 to 359 at 720 resolution
Advance angle compensation Range:1 to 359 at 360 resolution, 1 to 719 at 720 resolution
Speed input range:
1 to 1,600 at 360 resolution, 1 to 800 at 720 resolution
Note: Only zero will be accepted for the angle advancement input when the speed input is zero.
START, TRIG, BANK 1 to 3, and RESET
Photocoupler input impedance: 4.7 kΩ
RUN, ERROR, and M·DET
Open-collector output, maximum switching capacity, 300 mA at 26.4 VDC
5 r/min max.
2