E3Z-R61 Datasheet, PDF (16/19 Pages) Omron Electronics LLC – Compact Photoelectric Sensor with Built-in Amplifier

Dimensions
Sensors
Through-beam*
Pre-wired Models
E3Z-T61(K)
E3Z-T81(K)
E3Z-T61A
E3Z-T81A
E3Z-T62(-G0)
E3Z-T82(-G0)
Through-beam*
Connector Models
E3Z-T66
E3Z-T86
E3Z-T66A
E3Z-T86A
E3Z-T67(-G0)
E3Z-T87(-G0)
E3Z
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
12
Emitter
10.8
Power indicator
(orange)
2.1
7.2
20
2.8 3
Lens
31 11
25.4
Two, M3
4 dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.2 mm² (AWG24),
Insulator diameter: 1.1 mm), Standard length: 2 m
(Excluding -G0)
Terminal
No.
1
2
3
4
Specifi-
cations
+V
---
0V
---
Pins 2 and 4 are not used.
(-G0)
12.7
Terminal Specifi-
No.
cations
1
+V
2
Input
3
0V
4
---
Pin 4 is not used.
M12 Pre-wired Connector
(E3Z-T@@-M1J)
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
1
4
M12×1
2
3
M8 Pre-wired Connector
(E3Z-T@@K-M3J)
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
2
4
1
3
M8
11.2 4.5
Operation Indicator (orange) 7.5
Receiver
Stability indicator (green)
10.8
Operation selector
Sensitivity adjuster
2.1
7.2
20
2.8 3
Lens
31 11
25.4
Two, M3
4 dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm² (AWG24),
Insulator diameter:1.1 mm), Standard length: 2 m
12.7
Terminal
No.
1
2
3
4
Specifi-
cations
+V
---
0V
Output
Pin 2 is not used.
Press-fit e-CON Pre-wired Connector
5.9
1
2
3
15
4
15.6
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m,0.5m, and 2m
Clamp-type e-CON Pre-wired Connector
(E3Z-T61-ECON-C)
6
1
2
3
15.8
4
18
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 2m
* The Emitter cable has two conductors and the
Receiver cable has three conductors.
12
Emitter
10.8
Power indicator (orange)
2.1
7.2
20
2.8 ₃
Lens
31 11
25.4
10.4
Two, M3
M8 connector
(Excluding -G0)
Terminal
No.
1
2
3
4
Specifi-
cations
+V
---
0V
---
Pins 2 and 4 are not used.
(-G0)
12.7 _{Terminal Specifi-}
No.
cations
1
+V
2
Input
3
0V
4
---
Operation Indicator (orange)
9.75
11.2
7.5
Pin 4 is not used.
4.5
Operation
selector
Receiver
Stability indicator (green)
10.8
Sensitivity
adjuster
2.1
7.2
20
2.8 3
Lens
31 11
12.7 Terminal Specifi-
25.4
No.
cations
1
+V
2
---
Two, M3
3
0V
10.4
M8 connector
4
Output
9.75
Pin 2 is not used.
* Models numbers for Through-beam Sensors (E3Z-T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-T61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
16