E3C-1 Datasheet, PDF (15/18 Pages) Omron Electronics LLC – Special-Purpose Photoelectric Sensors

E3C
s E3C-C AMPLIFIER
Selection of operation mode
Selection of response time
Gate input operation
When the gate input terminal 9 is opened at HIGH level (6 to 30
VDC), the output relay performs the timer operation according
to the input signal (light incident or light interrupted).
When the gate input terminal 9 is short-circuited with the 0 V
terminal 2 at LOW level (0 to 2 VDC), the output relay releases
without regard to the input signal or output state. The terminal
generates an inhibit signal.
Setting the delay time
Selecting timer function
ON D.
(ON-delay)
operation
E3C
OFF D.
(OFF-delay)
operation
O.S.D.
(One-shot
delay)
operation
16