K35-3 Datasheet, PDF (14/17 Pages) Omron Electronics LLC – A Process Indicator Ideal for Discriminating and Displaying Measurements for Voltage/Current Signals

■ Output
K3HB-X
Comparative Output Pattern
Hysteresis
The output pattern for comparative outputs can be selected. In addi-
tion to high/low comparison with set values, output based on level
changes is also possible. (Use the type of output pattern appropriate
for the application.)
Comparative
set value HH
Comparative
set value H
Comparative
set value L
Comparative
set value LL
Output HH
Output H
Output PASS
Output L
Output LL
Comparative
set value HH
Comparative
set value H
Comparative
set value L
Comparative
set value LL
Output HH
Output H
Output PASS
Output L
Output LL
Standard Output
Zone Output
Measurement
value
Comparative
Higher
set value HH
Comparative
set value H
Comparative
Lower
set value L
Comparative
set value LL
ON Output HH
OFF _{Output H}
Output PASS
Output L
Output LL
Measurement
value
Higher
Lower
ON
OFF
Level Output
Measurement
value
Higher
Lower
ON
OFF
Output Logic
Reverses the output operation of comparative outputs for compara-
tive results.
Prevents comparative output chattering when the measurement
value fluctuates slightly near the set value.
Example: Comparative Output Pattern (Standard Output)
Comparative set value H
Hysteresis
Hysteresis
Comparative set value L
Comparative output H
Comparative output L
Startup Compensation Timer
Measurement can be stopped for a set time using external input.
When S-TMR and COM are interconnected and the startup compen-
sation timer is set, measurement will not be performed until a set
time after the power supply is tuned ON.
Input
H comparative set value
H output
H input
Startup
compensation
time set time
Time
PASS Output Change
Comparative results other than PASS and error signals can be output
from the PASS output terminal.
■ Dimensions
101.2
91
96
Terminal cover (included)
Character Size for Main Display (mm)
PV display
SV display
Panel Cutout Dimensions
120 min.
14.2
4.9
100
(112)
7.6
3.5
75 min.
92^+00.8
12
1.3
95*
2
48
45^+00.6
Mounting Recommended Panel Thickness
1 to 8 mm.
44.8
Mount the product horizontally.
*DeviceNet models: 97 mm
Terminal: M3, Terminal Cover: Accessory
14