E3Z-T66A Datasheet, PDF (14/15 Pages) Omron Electronics LLC – Photoelectric Sensor with Built-in Amplifier

E3Z
J ADJUSTMENT
Slits for Through-beam Models (E39-S65A/B/C/D/E/F) Sold Separately
Hook
Upper indented mounting portion
Protruding
portion
Lower
Slit
indented
portion
Sensor
Mounting Method
1. Hook the upper protruding portion of the Slit to the upper
indented mounting portion of the Sensor and adjust the posi-
tion of the Slit so that the Slit will be in parallel to the lens side
of the Sensor.
2. Press the lower protruding portion of the Slit onto the indented
mounting portion of the Sensor until the Slit snaps in.
Mounting Condition
Side View
Front View
Removal Method
1. Press the upper portion of the Slit.
2. Disconnect the lower protruding portion of the Slit from the
Sensor and remove the Slit.
E3Z
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
Cat. No. CEDSAX4
11/01
OMRON ON--LINE
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
Spieficcations subject to change without notice.
15
Printed in U.S.A.