E3X-NA512M Datasheet, PDF (12/14 Pages) Omron Electronics LLC – Manual Fiber Amplifier

Dimensions
Amplifier Units
Amplifier Units with Cables
E3X-NA11
E3X-NA11F
E3X-NA41
E3X-NA41F
E3X-NAG11
E3X-NAG41
E3X-NA21
E3X-NA51
10
Two, 2.4 dia.
E3X-NA
(Unit: mm)
With Mounting Bracket Attached
Incident level indicators
Operation indicator
A (See note 1.)
4-dia. vinyl-insulated round cable with 3
conductors (Conductor cross section: 0.2
mm²; Insulator diameter: 1.1 mm),
Standard length: 2 m.
* The EX3-NA21 and E3X-NA51 use
4-conductor cable.
13.05
15.75
9.2
3
64.3
38.6
5.3
8
31.5
9.9
10.7
10.75
Mounting Holes
Two, M3
16
4.1
Hole for optical communications (See note 2.)
22.4
16
2.4
13
34.8
4
Two, 3.2-dia. holes
22.4
16
Mounting bracket (E39-L143) (Order separately)
Stainless steel (SUS304)
3.4
4.4
4.4 3.4
Note: 1. The mounting bracket can also be
used on side A.
2. The hole for optical
communications is for preventing
mutual interference. There is no
hole for E3X-NA@F models.
Amplifier Units with Cables, Water-resistant Models
E3X-NA11V
E3X-NA41V
With Mounting Bracket Attached
28.65
9.2
25.95
(See note 2.)
12
Two, 2.4 dia.
Operation indicator
Incident level indicators
81.5
6.9
40
A (See note 1.)
33
8
9.9
10.7
3.9 3.4 4.3
11.5
Mounting Holes
Two, M3
23.9
14.4
23.9
16
2.8
16
37
67.2
16
3.4
11.2
Hole for
optical
communi-
cations
6.6
Mounting bracket (E39-L148) (Order separately)
5.4 Stainless steel (SUS304)
5.4 3.4
Note: 1. The mounting bracket can also be used on
side A.
2. 4-dia. vinyl-insulated round cable with 3
conductors (Conductor cross section: 0.45
mm², Insulator diameter: 1.1 mm),
Standard length: 2 m.
12