E2CA Datasheet, PDF (12/12 Pages) Omron Electronics LLC – Linear Output Proximity Sensor with High-accuracy Resolution

E2CA
Enclosed Mounting
If the Y92F-30 Adapter is used, insert the E2CA into the square hole
from the front side of the panel and slide the Y92F-30 onto the E2CA
from the rear side of the E2CA. Then press the Y92F-30 so that the
space between the Y92F-30 and the panel is reduced as much as
possible. Finally, secure the Y92F-30 with screws.
E2CA
Removing the Amplifier Unit
If the Y92F-30 is used, loosen the screws of the Y92F-30, spread
out the hooks, and remove the Y92F-30.
Panel
Y92F-30 Adapter
P3G-11 Back-mounting Socket
Others
The accuracy of the E2CA will vary with the on-site environment.
The resolution, temperature characteristics, and voltage character-
istic linearity are especially affected. Therefore, keep the on-site en-
vironment as suitable for the E2CA as possible.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. D77-E1-1 In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Sensors Division
Sensing Devices and Components Division H.Q.
28th Fl., Crystal Tower Bldg.
1-2-27, Shiromi, Chuo-ku,
Osaka 540-6028 Japan
Phone: [phone] Fax: [phone]
Printed in Japan
0398-0.5M (0398) a
12