G2R2SNDC24S Datasheet, PDF (10/11 Pages) Omron Electronics LLC – Slim and Space-saving Power Plug-in Relay

Mounting Tracks
PFP-100N, PFP-50N
PFP-100N2
G2R-@-S
4.5
15 25
25
25
25
10
10
1,000 (500)
7.3±0.15
35±0.3
15 (5)
27±0.15
1
It is recommended to use a panel 1.6 to 2.0 mm thick.
End Plate
PFP-M
50
10
6.2
1.8
1
35.5 35.3
1.8
11.5
1.3
10
M4 x 8 pan
4.8
head screw
Precautions
Cation
• Do not use the test button for any purpose other than testing. Be
sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely.
• Check that the test button is released before turning ON relay cir-
cuits.
• If the test button is pulled out too forcefully, it may bypass the mo-
mentary testing position and go straight into the locked position.
• Use an insulated tool when you operate the test button.
4.5
15 25 25
10
1,000
25
25 15
10
16
35±0.3 ²⁷ 24
29.2
1
1.5
Spacer
PFP-S
16
5
12
44.3
34.8
16.5
Precautions for P2RF-@-S Connection
• Do not move the screwdriver up, down, or from side to side while it
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
• Do not insert the screwdriver at an angle. Doing so may break the
side of the socket and result in a short-circuit.
10