English
Language : 

Z-15G-B Datasheet, PDF (1/6 Pages) Omron Electronics LLC – Common Accessories
Z/A/X/DZ Common Accessories
Ordering Information
■ Terminal Covers (Sold Separately)
Common to Z, A, X, and DZ Models
The Terminal Cover is secured using the switch’s side mounting screws and protects the casing and terminal wires from dust, vibration, or fingers,
thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections.
These sections can be torn open to provide holes for lead cables at desired points.
Material
Phenol resin
Metal press mold
Vinyl chloride
Application
Mounting direction
Side mounting
Side mounting
Side mounting
Soldering terminal use
Screw terminal use
Model
AP-A
AP-B
AP1-A
AP1-B
AP-Z
Remarks
---
Used for AP-A and AP-B
---
Note: Use the ‘Screw-terminal use’ Terminal Cover for DZ-series solder terminal models.
■ Separator (Sold Separately)
Common to Z, A, X, and DZ Models
Model: Separator for Z
■ Actuators (Sold Separately)
Common to Z and X Models
Pin Plunger Switches might need to be actuated by a cam or similar object, in which case, use one of the following Actuators according to the application.
Hinge lever
Actuator
Common to Z and X models
ZAA-1
Hinge roller lever
ZAA-2
Panel mount plunger
Panel mount roller plunger
Short
Medium
Long
ZAQ-3
ZAQ-2
ZAQ-1
ZAQ-22
Note: ZAQ-22 is constructed of ferrous material. Therefore, it cannot be used with the X Switch, because of the permanent magnet contained
within those models. Use the ZAQ-22 external panel mount roller plunger only with the Z or DZ switch.
Z/A/X/DZ Common Accessories 177