XW2B Datasheet, PDF (1/10 Pages) Omron Electronics LLC – Simplifies Connector and terminal block replacement, and requires less in-panel wiring.

Standard-type Connector-Terminal Block Conversion Units
XW2B
Simplifies Connector and terminal
block replacement, and requires less
in-panel wiring.
• Mount to DIN Track or via screws.
• MIL Flat Cable Connectors and Multi-pole, Square
Connectors are standard.
• Terminal blocks available with either M3 or M3.5 screws.
• Connecting Cables for Programmable Controllers
available (sold separately).
CSM_XW2B_DS_E_3_1
Ordering Information
Connectors
Type
Terminal Block
Connector
Flat Cable
Terminal block with
M3 screws
Terminal block with
M3.5 screws
Flat Cable Connectors
*1
No. of poles
20
34
40
50
60
20
34
40
50
60
Appearance
Model
XW2B-20G4
XW2B-34G4
XW2B-40G4
XW2B-50G4
XW2B-60G4
XW2B-20G5
XW2B-34G5
XW2B-40G5
XW2B-50G5
XW2B-60G5
Twin-connector
40
Terminal block with
M3.5 screws
Daisy Chain
20
XW2B-40G5-T
XW2B-20G5-D
Multi-pole, Square
Connector
Board I/O
20
Terminal block with
M3 screws
34
Multi-pole, Square Connector
50
Plugs
*2
20
34
Terminal block with
50
M3.5 screws
Multi-pole, Square Connector
20
Plugs
34
*2
50
Terminal block with
M3.5 screws
Multi-pole, Square Connector
Plugs
*3
40
XW2B-20Y4
XW2B-34Y4
XW2B-50Y4
XW2B-20Y5
XW2B-34Y5
XW2B-50Y5
XW2B-20X5
XW2B-34X5
XW2B-50X5
XW2B-40F5-P
*1. Flat Cable Connectors have one polarity slot.
*2. These Plugs and Sockets are made by Honda Tsushin Kogyo.
*3. These Plugs are made by Fujitsu.
Accessories (Order Separately)
Connecting Cables for Connector-Terminal Block Conversion Units
For details on the Connecting Cable used between XW2B Daisy Chain-type Connectors, refer to the XW2Z datasheet.
1