English
Language : 

XS2F-D421-DC0-A Datasheet, PDF (1/26 Pages) Omron Electronics LLC – Round Water-resistant Connectors (M12)
Round Water-resistant Connectors (M12)
XS2
CSM_XS2_DS_E_2_1
Water- and Environment-resistive FA
Connectors Save Wiring and Maintenance
Effort
• Compact FA connectors meet IP67 requirements and ensure a 94V-
0 fire retardant rating.
• A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
• Connectors with Cables and Connector Assemblies are available.
• Three types of Connector Assembly: Crimping, soldering, and
screw-on.
• Connectors with Cables are UL certified.
• Based on IEC61076-2-101 (IEC 60947-5-2) and NECA 4202.
Refer to Safety Precautions on page 26.
Construction (XS2G Soldering Connector Plug
Assemblies)
Lock spring
Fixture
Solder-cup pin
Watertight bushing
Cable clamp
O-ring
Contact block
Cover
Cap
Ratings and Specifications
Rated current
Rated voltage
Contact resistance (Connector)
Insulation resistance
Dielectric strength (Connector)
Degree of protection
Insertion tolerance
Assembled fixture strength
Cable holding strength
Ambient operating temperature
range
Ambient humidity range
3A
For DC 125 VDC, for AC 250 VAC
40 mΩ max. (20 mV max., 100 mA max.)
1,000 MΩ min. (at 500 VDC)
1,500 VAC for 1 min (leakage current:
1 mA max.).
IP67 (IEC529)
200 times min.
Tensile: 98 N/15 s
Torsion: 0.98 N·m/15 s
Cable diameter: 6 mm
98 N/15 s
4 to 5 mm 49 N/15 s
3 mm
29 N/15 s
Operating: − 25°C to 70°C
20% to 85%
Recommended Cables
Cable outer
diameter
8 mm
7 mm
6 mm
4 mm
7 to 8 mm
6 to 8 mm
5 to 6 mm
4 to 5 mm
3 mm 3 to 4 mm
Core sizes
Crimping models
Soldering
models
---
---
Two types of contacts
are available.
• 0.18 to 0.3 mm2
• 0.5 to 0.75 mm2
0.5 mm2 max.
Screw-on
models
0.18 to
0.75 mm2
Materials and Finish
Item
XS2F/H/W
XS2M/R/P
XS2C/G
Contacts
Materials
Phosphor
bronze
Brass
Finish Nickel base, 0.4-µm gold plating
Thread
bracket
Materials Brass *
Finish Nickel plated *
Pin block
Materials
PBT resin
(UL94V-0)
PA resin
(UL94V-0)
PBT resin
(UL94V-0)
Finish For DC: light gray; for AC: dark gray
O-ring/rubber bushing Rubber
Cover
Polyester
elastomer
---
PBT resin
(UL94V-0)
Cap
---
---
PBT resin
(UL94V-0)
Cable clamp
---
---
PA resin
(UL94V-0)
Pin clamp
---
---
PBT resin
(UL94V-0)
Lock spring
---
---
LCP resin
(UL94V-0)
Watertight bushing
---
---
Rubber
Ring
---
---
Steel
*The T-joint of the XS2R is aluminum/white.
Socket Appearance
DC type
Male (plug)
contacts
Female (socket)
contacts
AC type
Male (plug)
contacts
Female (socket)
contacts
1
4
2
3
2
1
3
4
1
4
2
3
2
1
3
4
Note: The AC and DC connectors are different as shown here and therefore
cannot be connected together.
1