XG2 Datasheet, PDF (1/4 Pages) Omron Electronics LLC – Flat Cable Connectors for PCBs

Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting.
IDC design allows for quick termination.
• Part of a total flat cable wiring solution, when used in
conjunction with XG4, XG5 and XG8 sockets and plugs.
• End terminates cable to a PCB or acts as a pass through
for connection to other cables or PCB’s.
• Uses a standard 2.54-mm grid terminal arrangement for
easier design of circuits.
• Terminal Arrangement: standard or reverse.
• Uses UL94V-0 approved insulation material.
• IDC Assembly Tools are available.
XG2 Connectors
■ Terminal Arrangement
The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the
wires and the terminals would be as shown below.
Standard Terminal
Arrangement
Reverse Terminal
Arrangement
Cable No.
Cable No.
Cable No.
Cable number arrangement (top view)
■ Ratings and Characteristics
Rated current
1A
Rated voltage
250 VAC
Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min. (leakage current: 1 mA
max.)
Operating
temperature
−55°C to 85°C (with no icing at low
temperature)
Cable No.
■ Materials and Finish
Base
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Contacts Mating end Copper alloy/nickel base, tin plating
Terminals Copper alloy/nickel base, tin plating
Cover
Fiber-glass reinforced PBT resin
(UL94V-0)/black
■ Applicable Wires
1.27-mm pitch, AWG28, 7-strand flat cable.
• UL2651 (standard cable)
• UL20012 (folding cable)
• UL20028 (color-coded cable)
Flat Cable Connectors for PCBs XG2
61