NE0A-SCPU01 Datasheet, PDF (1/6 Pages) Omron Electronics LLC – Safety Network Controller

Safety Network Controller
NE0A-SCPU01
CSM_NE0A-SCPU01_DS_E_4_1
New Lineup for Safety Applications
with Up to 12 Inputs
• Circuits for the required safety category are easy to build.
• The safety circuits you create can be registered as templates
and reused, for easy standardization.
• A wide range of TÜV-certified templates is also available.
• The NE0A operating conditions can be monitored from a
standard DeviceNet Master.
• Network distribution is possible by combining with an NE1A
Safety Controller.
• EN954-1 (Cat.4), ISO13849-1 (PLe), and IEC 61508 SIL3
certification.
Ordering Information
Name
No. of I/O points
Safety inputs Test outputs Safety outputs
Model
Unit version
Safety Network Controllers
12 *
2
6
NE0A-SCPU01
Ver. 1.0
Note: 1. The standard NE0A Safety Network Controller is equipped with spring-cage terminal blocks, but screw terminal blocks are available if
desired, e.g., to replace previous terminals.
2. Network Configurator version 2.1@ or higher must be used when using a NE0A-SCPU01 Safety Network Controller.
* When using the NE0A-SCPU01 as a standalone Controller, one input each is required for the feedback input and manual restart.
Specifications
Certified Standards
Certification
body
TÜV Rheinland
UL
Standard
NFPA 79-2007
ISO13849-1:1999
IEC61508 part1-7/12.98-05.00
IEC61131-2:2007
EN ISO13849-2:2003
EN ISO 13850:2006
EN954-1:1996
EN61000-6-4:2007
EN61000-6-2:2005
EN60204-1:2006
ANSI RIA15.06-1999
ANSI B11.19-2003
UL508
UL1604
UL1998
NFPA79
IEC61508
CSA22.2 No.142
CSA22.2 No.213
Specifications
Communications
11 to 25 VDC supplied via communica-
power supply voltage tions connector
Internal circuit power
supply voltage (V0) *1 _{20.4 to 26.4 VDC (24 VDC −15%/+10%)}
I/O power supply
voltage (V1, V2) *1
Cur-
rent
con-
sump-
tion
Communica-
tions power
supply
Internal cir-
cuit power
supply
I/O power
supply *2
24 VDC, 15 mA
24 VDC, 110 mA
24 VDC, 80 mA (Input)
80 mA (Output)
Overvoltage category II
Noise immunity
Conforms to IEC61131-2.
Vibration resistance
10 to 57 Hz: 0.35 mm,
57 to 150 Hz: 50 m/s²
Shock resistance
150 m/s² : 11 ms
Mounting method DIN Track (IEC 60715 TH35-7.5/TH35-15)
Ambient operating
temperature
−10 to 55°C
Ambient operating
humidity
10% to 95% (with no condensation)
Ambient storage tem-
perature
−40 to 70°C
Degree of protection IP20
Serial I/F
USB version 1.1
Weight
440 g max.
*1. V0-G0: Internal control circuit
V1-G1: For external input device, test output
V2-G2: For external output device
*2. Not including power consumption for external devices.
1