G9SP-N10D Datasheet, PDF (1/10 Pages) Omron Electronics LLC – Compact Stand-Alone Programmable Controller

Programmable Safety Controllers
G9SP
Compact Stand-Alone
Programmable Controller
• Stand-alone safety controller for small and mid-sized machinery
• Easy programming for complex safety control
• Three types of CPU with different I/O size to suit the application
• Four types of Expansion I/O Units for hard-wired diagnosis or
standard non-safety signals
• Clear diagnosis and monitoring via Ethernet (Omron FINS
protocol), EtherNet/IP, or serial (RS-232) connection
• Supports direct connection with non-contact switches and
safety mats
• Easy design, verification, standardization and reusage of safety
control by unique programming software
• ISO 13849-1(PLe), IEC61508(SIL3) certified
G9SP
Rev. 8.11
NEW!
Example of System Configuration
G9SP Series
J
Peripheral Tool
G9SP Configurator
PC
WS02-G9SP@@@
USB Cable
G9SP-N@@@
Memory Cassette
CP1W-ME05M
Expansion I/O Unit
CP1W-20EDT/EDT1
CP1W-32ET/ET1
Expandable up to 2 Units
(for non-safety machine control)
When the Units are distantly-positioned
such as one above the other layout
G9SP Series
I/O Connecting Cable
CP1W-CN811
Expansion I/O Unit
RS-232C
Option Board
CP1W-CIF01
Ethernet
Option Board
CP1W-CIF41 (Ver. 2.0 or later)
or
RS-232C or
Ethernet Communication
Standard PLC
Omron Scientific Technologies, Inc.
For the Latest Information
J4
USA Tel. [phone] Canada Tel. [phone]
On the Internet: www.sti.com