G7L Datasheet, PDF (1/14 Pages) Omron Electronics LLC – General Purpose Relay

General Purpose Relay
G7L
• Ideally suited for high-inrush fluid pump controls: pool/spa, water
processing, emergency, chemical industry, etc.
• High-capacity, high-withstand voltage relay with no contact chatter-
ing for momentary voltage drops up to 50% of rated voltage.
• UL Class B construction standard.
• Wide-range AC-activated coil that handles 100 to 120 VAC at either
50 or 60 Hz.
• Miniature hinge for maximum switching capacity, particularly for in-
ductive loads.
• Flame resistant materials (UL94V-0-qualifying) used for
all insulation material.
• Quick-connect, screw, and PCB terminals available.
• Standard models are UL, CSA, and TUV approved;
VDE/IEC 950 versions are now available. Meet pollution degree 3,
Material Group II & III.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G7L-1A-T-CB-AC100/120).
Type
E bracket (see note 1)
E bracket (see note 1)
(with test button)
Upper bracket
Upper bracket
(with test button)
PCB mounting
Contact form
SPST-NO
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
Quick-connect terminal
G7L-1A-T-CB
G7L-2A-T-CB
G7L-1A-TJ-CB
G7L-2A-TJ-CB
G7L-1A-TUB-CB
G7L-2A-TUB-CB
G7L-1A-TUBJ-CB
G7L-2A-TUBJ-CB
—
—
Model
Screw terminal
G7L-1A-B-CB
G7L-2A-B-CB
G7L-1A-BJ-CB
G7L-2A-BJ-CB
G7L-1A-BUB-CB
G7L-2A-BUB-CB
G7L-1A-BUBJ-CB
G7L-2A-BUBJ-CB
—
—
PCB terminal
—
—
—
—
—
—
—
—
G7L-1A-P-CB
G7L-2A-P-CB
Note: 1. E bracket or socket must be used for mounting (part number R99-07G5D). Refer to “Accessories” section for options and part numbers.
2. For VDE approved versions, please consult OMRON.
General Purpose Relay G7L 305