G6S_10 Datasheet, PDF (1/12 Pages) Omron Electronics LLC – Low Signal Relay

Low Signal Relay
G6S
Suface Mount DPDT Relay
• High dielectric withstand voltage of 2,000 VAC between coil
and contacts (standard type); 1,500 VAC between contacts
of different polarity.
• Meets FCC Part 68 and Telcordia 2.5 kV surge withstand.
• European version certified for EN60950/EN41003 Supple-
mentary Insulation at 250 V at Pollution Degree 2.
• Low power consumption of 140 mW (Non-latching)
• Available in through-hole and SMT terminals.
• Tape and reel or tube packaging.
• RoHS Compliant.
Ordering Information
■ Standard Version
.
Terminal
Gull-wing
Inside “L”
PCB through-hole
Model
Non-latching
Contact form
Standard
European Version*
DPDT
G6S-2F
G6S-2F-Y
G6S-2G
G6S-2G-Y
G6S-2
G6S-2-Y
Single coil latching
G6SU-2F
G6SU-2G
G6SU-2
Dual coil latching
G6SK-2F
G6SK-2G
G6SK-2
* Certified for EN60950/EN41003 Supplementary Insulation at 250 V (pollution degree 2)
Notes: 1. When ordering, add the rated coil voltage to the model number.
Example: G6S-2F DC12
Rated coil voltage
2. When ordering tape packing (surface mount models), add "-TR" to the model number.
Example: G6S-2F-TR DC12
Tape packing
"-TR" is not part of the relay model number. Therefore, it is not marked on the relay case.
3. Dual coil latching models are available with a High-sensitivity coil. (140 mW; 200 mW for DC24)
When ordering High-sensitivity dual coil latching models, add "-H” to the model number.
Example: G6SK-2G-H-TR DC5
High-sensitivity coil
Model Number Legend
G6S -
- - DC
1 23 4 5 6
1. Relay Function
None: Non-latching
U: Single coil latching
K: Dual coil latching
3. Terminal Shape
None: Through-hole
F: Gull-wing surface mount
G: Inside “L” surface mount
5. Packaging
None: Tube packaging
TR: Tape and reel packaging
(Surface mount models)
2. Contact Form
2: DPDT
4. Approved Standards
6. Rated Coil Voltage
None: UL/CSA
3, 4.5, 5, 12, 24 VDC
Y: EN60950/EN41003
(Standard coil models - 5, 12, 24 VDC )
Low Signal Relay G6S
95