G6K-2G-Y-DC45 Datasheet, PDF (1/11 Pages) Omron Electronics LLC – Low Signal Relay

Low Signal Relay
G6K
• Compact fourth generation design, offers excellent board
space savings.
• Available in 2.54 and 3.2 mm coil-contact terminal spacing.
• “-Y” models meet 2.5 kV Bellcore surge requirements.
• Conforms to FCC Part 68.
• Terminal design based on Omron’s successful G6S relay.
• Available in PCB through-hole, SMT gullwing and SMT
“inside-L” terminals.
• UL recognized / CSA certified.
• Available in single coil latching.
• RoHS Compliant.
RC
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G6K-2F-DC5).
Terminal
Gullwing
Inside “L”
PCB through-hole
Contact form
DPDT
Non-latching
2.54 mm spacing
G6K-2F
G6K-2G
G6K-2P
Model
Non-latching
3.2 mm coil-contact
terminal spacing
G6K-2F-Y
G6K-2G-Y
G6K-2P-Y
Single coil latching
3.2 mm coil-contact
terminal spacing
G6KU-2F-Y
G6KU-2G-Y
G6KU-2P-Y
When ordering tape packing (surface mount versions), add “-TR” to the model number (e.g., G6K-2G-TR-DC5)
Specifications
■ Contact Data
Load
Rated load
Contact material
Max. carry current
Max. operating voltage
Max. operating current
Max. switching capacity
Min. permissible load (See note)
Resistive load (cosφ=1)
0.3 A at 125 VAC
1 A at 30 VDC
Ag (Au clad)
1A
125 VAC, 60 VDC
1A
37.5 VA, 30W
10 μA at 10 mVDC
Note: This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary
depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.
Low Signal Relay G6K
53