F03-16PS Datasheet, PDF (1/2 Pages) Omron Electronics LLC – Liquid Leakage Point Sensor

Liquid Leakage Point Sensor
F03-16PS
CSM_F03-16PS_DS_E_2_2
A New Liquid Leakage Point Sensor Has Been Added
to the K7L Series. Fluoroplastic Coating on the
Bottom Electrode Ensures Chemical Resistance.
• Can be used in conjunction with Sensing Bands.
• Stud screw mounting requires no tools for installation.
• No tools means the Sensor can be wiped clean quickly and easily.
• The optional Mounting Bracket enables faster installation than three-screw
mounting.
• Connect multiple Sensors to one K7L Amplifier for significant cost savings.
Ordering Information
Indicates models that allow free cutting.
Sensors
Product name
Main material
Cable material
Electrode material
Liquid Leakage Point Sensor
Polyethylene
Outer sheath: PVC
Inner sheath: Fluoroplastic
SUS304
SUS304 and fluoroplastic coating
Mounting Brackets (See note 1.)
---
---
Terminal Block (See note 2.)
Nylon 6.6
---
---
Note: 1. Use a commercially available bonding agent for PVC. One bag contains 10 Brackets.
2. One bag contains 10 Blocks.
Amplifier
Product name
Liquid Leakage Sensor Amplifier
K7L-U
Model
Model
F03-16PS
F03-16PS-F
F03-26PS
F03-20
Specifications
Wiring Diagram
Material Sensor Am-
plifier
Conductor
Core
Ambient operating
temperature range
Weight
Maximum number of
Point Sensors con-
nected per Amplifier
Applicable Amplifier
Polyethylene
Outer sheath: PVC, Inner sheath: Fluorine resin
F03-16PS: SUS304 stainless steel
F03-16PS-F: SUS304 and fluorine coating
−10 to 60°C
Approx. 30 g
Any number up to an overall cable length of
400 m.
K7L-U (excluding Liquid Leakage Sensor
Amplifier with disconnection detection function)
Mounting Methods
Any number of Sensors can be connected in parallel up to an overall
cable length of 400 m. Leakage areas cannot be specified with the
K7L.
54
63
72
81
K7L-U
Liquid Leakage
Sensor Amplifier
44
33
22
44
33
22
F03-16PS
Liquid Leakage Point Sensor
44
33
22
F03-20
Terminal Block
F03-16PS
Liquid Leakage Point Sensor
Sensing Band
Overall cable length: 400 m max.
Stud Screw Mounting
Securing the Sensor with a Nut
Securing the Sensor with a Wing Nut
Special Bracket Mounting
(See note.)
Note: Use a commercially available bonding agent for PVC.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
1