|
EE-SY310 Datasheet, PDF (1/4 Pages) Omron Electronics LLC – Photomicrosensor (Reflective) | |||
|
Photomicrosensor (Reflective)
EE-SY310/-SY410
I Dimensions
Note: All units are in millimeters unless otherwise indicated.
Five, 0.5
Two. R1.5
Two. R2
4.6
+0.2
â0.3
I Features
⢠Incorporates an IC chip with a built-in detector element and amplifier.
⢠Incorporates a detector element with a built-in temperature com-
pensation circuit.
⢠Compact reflective model with a molded housing.
⢠A wide supply voltage range: 4.5 to 16 VDC
⢠Directly connects with C-MOS and TTL.
⢠Dark ON model (EE-SY310)
⢠Light ON model (EE-SY410)
⢠RoHS Compliant.
I Absolute Maximum Ratings (Ta = 25°C)
Five, 0.3
15 to 18
17 to 24
Internal Circuit
A
V
O
Unless otherwise specified, the
K
G
tolerances are as shown below.
Item
Symbol Rated value
Emitter
Forward current
IF
50 mA (see note 1)
Reverse voltage
VR
4V
Pulse forward current IFP
1 A (see note 2)
Detector
Power supply voltage VCC
16 V
Output voltage
VOUT
28 V
Output current
IOUT
16 mA
Permissible output POUT
dissipation
250 mW
(see note 1)
Ambient Operating
Topr â40°C to 75°C
temperature Storage
Tstg â40°C to 85°C
Soldering temperature
Tsol 260°C (see note 3)
Terminal No.
Name
A
Anode
K
Cathode
V
Power supply
(Vcc)
O
Output (OUT)
G
Ground (GND)
Dimensions
3 mm max.
3 < mm ⤠6
6 < mm ⤠10
10 < mm ⤠18
18 < mm ⤠30
Tolerance
±0.2
±0.24
±0.29
±0.35
±0.42
Note: 1. Refer to the temperature rating chart if the ambient temper-
ature exceeds 25°C.
2. The pulse width is 10 µs maximum with a frequency of 100 Hz.
3. Complete soldering within 10 seconds.Ordering Information
I Ordering Information
Description
Photomicrosensor (reflective)
Dark ON
Light ON
Model
EE-SY310
EE-SY410
I Electrical and Optical Characteristics (Ta = 25°C)
Emitter
Detector
Item
Symbol
Forward voltage
VF
Reverse current
IR
Peak emission wavelength λP
Low-level output voltage VOL
Value
1.2 V typ., 1.5 V max.
0.01 µA typ., 10 µA max.
920 nm typ.
0.12 V typ., 0.4 V max.
High-level output voltage VOH
15 V min.
Current consumption
Peak spectral sensitivity
wavelength
LED current when output is OFF
LED current when output is ON
Hysteresis
Response frequency
Response delay time
Response delay time
ICC
λP
IFT
âH
f
tPLH (tPHL)
tPHL (tPLH)
3.2 mA typ., 10 mA max.
870 nm typ.
6 mA typ., 15 mA max.
17% typ.
50 Hz min.
3 µs typ.
20 µs typ.
Condition
IF = 20 mA
VR = 4 V
IF = 20 mA
Vcc = 4.5 to 16 V, IOL = 16 mA,
without incident light (EE-SY310), with incident light
(EE-SY410) (see notes 1 and 2)
Vcc = 16 V, RL = 1 kâ¦,
with incident light (EE-SY310), without incident light
(EE-SY410) (see notes 1 and 2)
Vcc = 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA
328
Photomicrosensor (Reflective) EE-SY310/-SY410
|
▷ |