EE-SX911P-R1M Datasheet, PDF (1/9 Pages) Omron Electronics LLC – Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated)

Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated)
EE-SX91
CSM_EE-SX91_DS_E_7_1
Meeting Customer Needs with Compact
Sensors that Mount with M3 Screws
• Both light-ON and dark-ON outputs provided.
• A compact size and choice of five models for a wide
range of applications.
• Compact NPN and PNP output models.
• Safer operation with built-in power supply reverse polarity protection.
• Output overcurrent protection with a thermal shutdown circuit (patent
pending). *
• Mount using M3 or M2 screws.
• Indicator is visible in many directions for installation
in any location.
• Flexible robot cables are standard on all models.
* Output overcurrent protection is provided only on output 2 (OUT2) on NPN models.
Features
Be sure to read Safety Precautions on
page 6.
A Compact Size and Choice of Five Models
for a Wide Range of Applications
Select any of five models to minimize the space required.
Flexible Robot Cables: Standard on All Models
Robot Cables are effective for moving parts, and are provided as
standard equipment with all models.
Both Light-ON and Dark-ON Outputs
Both light-ON and dark-ON outputs are provided on all models,
allowing outputs to be switched by simply changing the wiring
according to the application.
Compact NPN and PNP Output Models
Both NPN and PNP output models are available for use according to
system requirements.
Indicator Visible from Many Directions for
Installation in Any Location
The light indicator can be checked from up to four directions.
Safer Operation with Built-in Power Supply
Reverse Polarity Protection
The built-in power supply reverse polarity protection protects against
reverse connection of the power supply or outputs for safer operation
at the assembly site.
NPN
Light indicator
(orange)
Main
circuit
Vcc
Load 1
OUT1
(Control
output)
Load 2
OUT2
5 to
(Control output) ^{24 VDC}
GND (0 V)
Reverse polarity protection
Mount Using M3 or M2 Screws
The EE-SX91 can be mounted using M3 or M2 screws, so it can
easily replace an existing compact sensor mounted with M2 screws.
1