EE-SX460-P1 Datasheet, PDF (1/4 Pages) Omron Electronics LLC – Photomicrosensor (Transmissive)

Photomicrosensor (Transmissive)
EE-SX460-P1
I Dimensions
Note: All units are in millimeters unless otherwise indicated.
171826-3
(Tyco Electronics AMP)
Optical
axis
Two,
R1
Optical
axis
Mounting face
0.5 (Aperture
width)
15±0.2
Internal Circuit
V
O
G
Terminal No.
Name
V
Power supply
(Vcc)
O
Output (OUT)
G
Ground (GND)
Unless otherwise specified, the
tolerances are as shown below.
Dimensions
3 mm max.
3 < mm ≤ 6
6 < mm ≤ 10
10 < mm ≤ 18
18 < mm ≤ 30
Tolerance
±0.3
±0.375
±0.45
±0.55
±0.65
I Features
• Snap-in mounting model.
• Mounts to 0.8- to 1.6-mm-thick panels.
• High resolution (aperture width of 0.5 mm)
• With a 5-mm-wide slot.
• Photo IC output signals directly connect with C-MOS and TTL.
• Connects to Tyco Electronics AMP’s EI-series connectors.
I Absolute Maximum Ratings (Ta = 25°C)
Item
Power supply voltage
Output voltage
Output current
Permissible output dissipation
Ambient
temperature
Operating
Storage
Soldering temperature
Symbol
V_CC
V_OUT
I_OUT
P_OUT
Topr
Tstg
Tsol
Rated value
10 V
28 V
16 mA
250 mW
(see note)
–20°C to 75°C
–40°C to 85°C
---
Note: Refer to the temperature rating chart if the ambient temperature
exceeds 25°C.
I Ordering Information
Description
Photomicrosensor (transmissive)
Model
EE-SX460-P1
Recommended Mating Connectors:
Tyco Electronics AMP 171822-3 (crimp connector)
172142-3 (crimp connector)
OMRON
EE-1005 (with harness)
I Electrical and Optical Characteristics (Ta = 25°C, V_CC = 5 V±10%)
Item
Current consumption
Low-level output voltage
High-level output voltage
Response frequency
Symbol
I_CC
V_OL
V_OH
f
Value
30 mA max.
0.3 V max.
(V_CC x 0.9) V min.
3 kHz min.
Condition
With and without incident
I_OUT = 16 mA with incident
V_OUT = V_CC without incident, R_L = 47 kΩ
V_OUT = V_CC, R_L = 47 kΩ (see note)
Note: The value of the response frequency is measured by
rotating the disk as shown below.
Disk
0.5 mm
2.1 mm
0.5 mm
t = 0.2 mm
264
Photomicrosensor (Transmissive) EE-SX460-P1