English
Language : 

EE-SX305 Datasheet, PDF (1/4 Pages) Omron Electronics LLC – Photomicrosensor (Transmissive)
Photomicrosensor (Transmissive)
EE-SX305/-SX405
I Dimensions
Note: All units are in millimeters unless otherwise indicated.
Optical axis
Center mark
Optical
axis
10±0.2
Optical
axis
Cross section BB
Five, 0.25
Five, 0.25
2.5±0.2
Cross section AA
Internal Circuit
K
V
O
A
G
Terminal No.
Name
A
Anode
K
Cathode
V
Power supply
(Vcc)
O
Output (OUT)
G
Ground (GND)
Unless otherwise specified, the
tolerances are as shown below.
Dimensions
3 mm max.
3 < mm ≤ 6
6 < mm ≤ 10
10 < mm ≤ 18
18 < mm ≤ 30
Tolerance
±0.3
±0.375
±0.45
±0.55
±0.65
I Features
• Incorporates an IC chip with a built-in detector element and amplifier.
• Incorporates a detector element with a built-in temperature com-
pensation circuit.
• A wide supply voltage range: 4.5 to 16 VDC
• Directly connects with C-MOS and TTL.
• High resolution with a 0.5-mm-wide sensing aperture.
• Dark ON model (EE-SX305); Light ON model (EE-SX405)
• RoHS Compliant.
I Absolute Maximum Ratings (Ta = 25°C)
Item
Symbol Rated value
Emitter
Forward current
IF
50 mA (see note 1)
Reverse voltage
VR
4V
Detector Power supply voltage VCC
16 V
Output voltage
VOUT
28 V
Output current
IOUT
16 mA
Permissible output POUT
dissipation
250 mW (see note 1)
Ambient Operating
temperature Storage
Topr
Tstg
–40°C to 75°C
–40°C to 85°C
Soldering temperature
Tsol 260°C (see note 2)
Note: 1. Refer to the temperature rating chart if the ambient temper-
ature exceeds 25°C.
2. Complete soldering within 10 seconds.
I Ordering Information
Description
Photomicrosensor (transmissive)
Dark ON
Light ON
Model
EE-SX305
EE-SX405
I Electrical and Optical Characteristics (Ta = 25°C)
Emitter
Detector
Item
Symbol
Forward voltage
VF
Reverse current
IR
Peak emission
λP
wavelength
Low-level output voltage VOL
Value
1.2 V typ., 1.5 V max.
0.01 µA typ., 10 µA max.
940 nm typ.
0.12 V typ., 0.4 V max.
High-level output
VOH
voltage
Current consumption ICC
Peak spectral sensitivity λP
wavelength
LED current when output is OFF
IFT
LED current when output is ON
Hysteresis
∆H
Response frequency
f
Response delay time
Response delay time
tPLH (tPHL)
tPHL (tPLH)
15 V min.
3.2 mA typ., 10 mA max.
870 nm typ.
3 mA typ., 8 mA max.
15% typ.
3 kHz min.
3 µs typ.
20 µs typ.
IF = 20 mA
VR = 4 V
IF = 20 mA
Condition
VCC = 4.5 to 16 V, IOL = 16 mA, IF = 0 mA (EE-SX305),
IF = 8 mA (EE-SX405)
VCC = 16 V, RL = 1 kΩ, IF = 8 mA (EE-SX305),
IF = 0 mA (EE-SX405)
VCC = 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V
VCC = 4.5 to 16 V (see note 1)
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA (see note 2)
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA (see note 3)
VCC = 4.5 to 16 V, IF = 15 mA, IOL = 16 mA (see note 3)
228
Photomicrosensor (Transmissive) EE-SX305/-SX405