English
Language : 

EE-SG3 Datasheet, PDF (1/4 Pages) Omron Electronics LLC – Photomicrosensor (Transmissive)
Photomicrosensor (Transmissive)
EE-SG3/EE-SG3-B
I Dimensions
Note: All units are in millimeters unless otherwise indicated.
Two, 3.2±0.2
dia. holes
13
19±0.1
25.4±0.2
3.6±0.2
Optical axis
Four, 0.25
7.62±0.3
0.8
Four, 1.5
2.54
1.2
Four, 0.5
2.54±0.3
0.6
Cross section AA
Cross section AA
Internal Circuit
K
C
A
E
Terminal No. Name
A
Anode
K
Cathode
C
Collector
E
Emitter
Unless otherwise specified, the
tolerances are as shown below.
Dimensions
3 mm max.
3 < mm ≤ 6
6 < mm ≤ 10
10 < mm ≤ 18
18 < mm ≤ 30
Tolerance
±0.3
±0.375
±0.45
±0.55
±0.65
I Features
• Dust-proof model.
• Solder terminal model (EE-SG3).
• PCB terminal model (EE-SG3-B).
• RoHS Compliant.
I Absolute Maximum Ratings (Ta = 25°C)
Item
Emitter
Forward current
Pulse forward
current
Reverse voltage
Detector
Collector–Emitter
voltage
Emitter–Collector
voltage
Collector current
Collector
dissipation
Ambient Operating
temperature Storage
Soldering temperature
Symbol Rated value
IF
50 mA (see note 1)
IFP
1 A (see note 2)
VR
VCEO
4V
30 V
VECO
---
IC
20 mA
PC
100 mW (see note 1)
Topr –25°C to 85°C
Tstg –30°C to 100°C
Tsol 260°C (see note 3)
Note: 1. Refer to the temperature rating chart if the ambient temper-
ature exceeds 25°C.
2. The pulse width is 10 µs maximum with a frequency of 100 Hz.
3. Complete soldering within 10 seconds.
I Ordering Information
Description
Photomicrosensor (transmissive) Solder terminal
PCB terminal
Model
EE-SG3
EE-SG3-B
I Electrical and Optical Characteristics (Ta = 25°C)
Emitter
Detector
Rising time
Falling time
Item
Forward voltage
Reverse current
Peak emission wavelength
Light current
Dark current
Leakage current
Collector–Emitter saturated
voltage
Peak spectral sensitivity
wavelength
Symbol
VF
IR
λP
IL
ID
ILEAK
VCE (sat)
λP
tr
tf
Value
1.2 V typ., 1.5 V max.
0.01 µA typ., 10 µA max.
940 nm typ.
2 mA min., 40 mA max.
2 nA typ., 200 nA max.
---
0.1 V typ., 0.4 V max.
850 nm typ.
4 µs typ.
4 µs typ.
Condition
IF = 30 mA
VR = 4 V
IF = 20 mA
IF = 15 mA, VCE = 10 V
VCE = 10 V, 0 lx
---
IF = 30 mA, IL = 1 mA
VCE = 10 V
VCC = 5 V, RL = 100 Ω, IL = 5 mA
VCC = 5 V, RL = 100 Ω, IL = 5 mA
234
Photomicrosensor (Transmissive) EE-SG3/EE-SG3-B