E3X-DRT21 Datasheet, PDF (1/5 Pages) Omron Electronics LLC – Communications Units for E3X-DA-N-series Fiber Amplifiers

Communications Units for E3X-DA-N-series Fiber Amplifiers
E3X-DRT21/SRT21/CIF11
CSM_E3X-DRT21_SRT21_CIF11_DS_E_2_1
Three New Communications
Units for Fiber Amplifiers
DeviceNet
Communications
Unit
E3X-DRT21
CompoBus/S
Communications
Unit
E3X-SRT21
RS-422
Communications
Unit
E3X-CIF11
Features
Fibers
RS422
Optical _{Communications}
Programmable Controller
Reduced Wiring
New connectors enable wiring and space reductions, as well as easier maintenance.
Create the Required Number of Channels by Connecting Up To 16 Units
(14 Units for CompoBus/S).
A New Amplifier That Monitors the ON/OFF Incident Level.
The peak data and bottom data are updated according
to the ON/OFF timing of the Sensor.
This feature enables monitoring of aging and remote
setting of thresholds, even in applications with a high
ON/OFF frequency.
(One is updated when the Sensor turns ON, and the
other when the Sensor turns OFF, depending on
whether the Sensor is light-ON or dark-ON.)
Incident level data
Threshold value
Bottom data
Peak data
E3X-DA6-P
Wiring-reduction
Connector
E3X-CN02
Mobile Console
Connecting a hand-held
Mobile Console enables easy
setting and monitoring.
Terminal-block Unit ^E39-TM1
Using a Terminal-block Unit allows input
from Basic Switches.
Basic Switch
1