E3FS Datasheet, PDF (1/10 Pages) Omron Electronics LLC – Safety design for category 2. Suitable for detecting human bodies in hazardous area.

Safety Photoelectric Switch
E3FS
Safety design for category 2.
Suitable for detecting human
bodies in hazardous area.
±
Main features
● The E3FS is a Type 2 Safety Single Beam intended to be
used with the control unit F3SP-U1P-TGR for the control
system of a machine to category 2, 1 or B as defined in the
European standard EN 954-1.
● Compliance with Machinery directive: No. 98/37/EC, EMC
Directive: No. 89/336/EEC, EN 61496-1 (06/98) (Type 2
ESPE), and IEC61496-2 (1997) (Type 2 Active
Optoelectronic Protection device).
● Approved by TÜV Product Service (Notified Body) as Type
2 ESPE (Electro-Sensitive-Protective-Equipment), Type 2
AOPD (Active Optoelectronic Protection device) and CE
marking.
● Pursuing safety with high level of safety design and FMEA.
● System configuration of up to four units is possible.
● With the control unit F3SP-U1P-TGR, two different muting
functions can be selected for each set of E3FS separately.
● Compact and space-saving (M18 DIN-sized threaded
cylindrical housing, axial type)
● Housing materials: plastic and nickel brass
● Connection: Pre-wired and M12 plug
● High enclosure ratings (IP67)
● Sensing distance 10m
D-30
Safety Sensors / Components