DZ-10G-1A Datasheet, PDF (1/8 Pages) Omron Electronics LLC – Special-purpose Basic Switch

Special-purpose Basic Switch
DZ
DPDT Basic Switch for Two Independent
Circuit Control
• Incorporates two completely independent built-in switches.
• Ideal for switching the circuits operating on two different
voltages, and for controlling two independent circuits.
• Interchangeable with OMRON Z Basic Switches, as both
switches are identical in mounting hole dimensions,
mounting pitch and pin plunger position.
Ordering Information
Actuator
Pin plunger
Hinge lever
Short hinge roller lever
Hinge roller lever
Terminal
OT (min.)
0.13 mm
1.6 mm
0.4 mm
0.9 mm
0.13 mm
1.2 mm
0.26 mm
Model Number Legend
DZ-10 G - 1
1 23 45
1. Ratings
10: 10 A (250 VAC)
2. Contact Gap
G: 0.5 mm
Solder terminal (-1A)
Model
DZ-10G-1A
DZ-10GW-1A
DZ-10GV-1A
DZ-10GW22-1A
DZ-10GV22-1A
DZ-10GW2-1A
DZ-10GV2-1A
3. Actuator
None: Pin plunger
Low OT Levers:
V: Hinge lever
V22: Short hinge roller lever
V2: Hinge roller lever
High OT Levers:
W: Hinge lever
W22: Short hinge roller lever
W2: Hinge roller lever
Screw terminal (-B)
Model
DZ-10G-1B
DZ-10GW-1B
DZ-10GV-1B
DZ-10GW22-1B
DZ-10GV22-1B
DZ-10GW2-1B
DZ-10GV2-1B
4. Contact Form
1: DPDT
5. Terminals
A: Solder terminal
B: Screw terminal
Special-purpose Basic Switch DZ
89