D4CC4024 Datasheet, PDF (1/12 Pages) Omron Electronics LLC – Many Models Including Roller Lever Switches are Only 16-mm Thick with Connector

Miniature Limit Switch
D4CC
Many Models Including Roller Lever
Switches are Only 16-mm Thick with
Connector
• New center roller lever models that enable ganged mounting of
up to 6 Switches.
• Cable connectors for easy Switch replacement.
• Triple-seal construction for plungers to provide IEC IP67, UL,
and CSA (type 3, 4, 13) degree of protection.
• Operation indicators available for easy monitoring (standard in-
dicator is lit when Switch is not operating).
Model Number Structure
■ Model Number Legend
D4CC-@0@@
12
1. Rated Load
(These codes are different from suffix codes of the D4C)
1: 1 A at 125 VAC
2: 1 A at 125 VAC (with LED indicator)
3: 1 A at 30 VDC
4: 1 A at 30 VDC (with LED indicator)
2. Actuator
01: Pin plunger
02: Roller plunger
03: Crossroller plunger
10: Bevel plunger
24: Roller lever
31: Sealed pin plunger
32: Sealed roller plunger
33: Sealed crossroller plunger
41: Panel mount pin plunger
42: Panel mount roller plunger
43: Panel mount crossroller plunger
50: Plastic rod
60: Center roller lever
Note: With standard models, the operation indicator turns OFF when
the switch operates. If models with operation indicators that
turn ON when the switch operates are required, add "-B” to the
end of the model number.
Miniature Limit Switch D4CC
1