B3S-1000 Datasheet, PDF (1/5 Pages) Omron Electronics LLC – Mechanical Key Switch (SMD)

Mechanical Key Switch (SMD)
B3S
Surface-mounted Device (SMD) Design
Meets High-density Mounting
Requirements
The whole switch body can be washed after
soldering due to its sealing property.
Sealed construction provides high reliability in
dusty environments.
Available with ground terminal for protection
against static electricity.
Positive tactile feedback.
Fully sealed.
Ordering Information
6 6-mm-type B3S-1000 Series
Operating force (OF)
Without ground terminal
Bags
Embossed tape
(see note)
General-purpose 1.57 N (160 gf)
B3S-1000
B3S-1000P
High-force
2.25 N (230 gf)
B3S-1002
B3S-1002P
Note: Switches on embossed tape must be ordered in units of 1,000.
With ground terminal
Bags
Embossed tape
(see note)
B3S-1100
B3S-1100P
B3S-1102
B3S-1102P
Specifications
Ratings/Characteristics
Switching capacity
Insulation voltage
Contact configuration
Contact resistance
Insulation resistance
Dielectric strength
Bounce time
Vibration resistance
Shock resistance
Life expectancy
Ambient temperature
Ambient humidity
Weight
5 to 24 VDC, 1 to 30 mA (resistive load)
30 VDC
SPST-NO
100 mΩ max. (initial value) (Rated 5 VDC, 1 mA)
100 MΩ min. (at 250 VDC)
500 VAC, 50/60 Hz for 1 min
5 ms max.
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s² min. (approx. 100G min.)
Malfunction: 100 m/s² min. (approx. 10G min.)
General-purpose models:
High-force models:
500,000 operations min.
300,000 operations min.
Operating: –25°C to 70°C (with no icing)
Operating: 35% to 85%
Approx. 0.30 g
1