A7BS-206-1 Datasheet, PDF (1/11 Pages) Omron Electronics LLC – Wide Range of Locking-type Models Available

Thumbwheel Switch
A7BS/A7BL
Wide Range of Locking-type
Models Available
■ Character height of 4.8 mm makes for easy-to-
view display.
■ Installation is easy with snap-in mounting.
■ The series includes a complete range of locking-
type models that prevent accidental operation.
Ordering Information
Switches (Single Switch Units)
Model
A7BS
Screw mounting (front mounting)
A7BS-20@-S
Snap-in (front mounting)
Classification
(See note 1.)
Terminals
Color
Output code number
06 (binary coded decimal)
07 (binary coded decimal, with component
adding provision) *3
19 (decimal code, with component-adding provision)
54 (binary coded hexadecimal)
55 (binary coded hexadecimal, with
component-adding provision) *3
Model
Light gray
A7BS-206 *2
A7BS-207 *2
A7BS-219
A7BS-254
A7BS-255
With external stoppers
Solder terminals *1
Black
Light gray
Model
A7BS-206-1 *2
A7BS-206-S
Black
A7BS-206-S-1
A7BS-207-1 *2
A7BS-207-S
A7BS-207-S-1
A7BS-219-1
---
---
A7BS-254-1
---
---
A7BS-255-1
---
---
A7BL
Snap-in (front mounting)
Classification
(See note 1.)
Locking type
Terminals
Color
Output code number
06 (binary coded decimal)
07 (binary coded decimal, with component-
adding provision) *3
Solder terminals *1
Light gray
Black
Model
A7BL-206 *2
A7BL-206-1 *2
A7BL-207 *2
A7BL-207-1 *2
Note: 1. The classification diagrams show 4 Switch Units combined with End Caps to create 4-digit displays.
2. The model numbers given above are for Switch Units.
3. Models with +, - displays can also be produced. Add "-PM" (+/- alternating display) or "-MP" (-/+ alternating display) after the "206" or "207" in the model number
(e.g., A7BS-206-PM, A7BS-207-PM-1, or A7BS-206-MP). There is no "-MP" type available, however, for A7BS-20@-S models.
*1. For models with PCB terminals, add "-P2" to the model number (e.g., A7BS-207-P2-1).
*2. Models with internal stoppers are also available. Add "-S@@" after the "206" or "207" in the model number and specify the display range in the @@. For example,
to specify the range 0 to 6, add "-S06" to the model number (e.g., A7BS-206-S06-1).
*3. Models with diodes are available. Add "-D" to the model number (e.g., A7BS-207-D or A7BS-207-D-1).
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
1