A6A Datasheet, PDF (1/6 Pages) Omron Electronics LLC – Sealed Rotary DIP Switch

Sealed Rotary DIP Switch
A6A
Subminiature DIP Switch for High-Density
Packaging
• Series includes a Cone type that can be operated from the
top or side, an extended shaft type that can be operated
while mounted on a panel, and a flat type.
• A slider lock and rotating PCB system achieve stable
contact reliability.
• Sealed construction equivalent to IP64 (IEC 60529) prevents
flux penetration and provides high contact reliability even in
dusty locations and locations where water is used
• RoHS Compliant
Ordering Information
Standard (Cone)
Part Numbers
Flat
Extended shaft
Thumbwheel
Output code
BCD 1-2-4-8
BCD 1-2-4-8 complement
BCD Hexadecimal 1-2-4-8
BCD Hexadecimal 1-2-4-8 complement
No. of positions
10
16
Important Note: Switches cannot be water-washed.
A6A-10R
A6A-10C
A6A-16R
A6A-16C
A6A-10RF
A6A-10CF
A6A-16RF
A6A-16CF
A6A-10RS
A6A-10CS
A6A-16RS
A6A-16CS
A6A-10RW
A6A-10CW
A6A-16RW
A6A-16CW
Specifications
■ Characteristics
Switching capacity
Contact resistance
Insulation resistance
Dielectric strength
Operating torque
Vibration resistance
Malfunction durability
Shock resistance
Malfunction durability
Ambient operating temperature
Ambient operating humidity
Service life
Mechanical
Electrical
Weight
Note: Data shown are of initial value.
100 mA at 28 VDC, 1 mA at 5 VDC (minimum load)
200 MΩ max.
10 MΩ min. (at 250 VDC)
500 VAC for 1 minute between current-carrying metal part and ground
250 VAC for 1 minute between terminals
120 to 250 g-cm (1.18 to 2.45 x 10^-2 N·m) max.
10 to 55 Hz, 1.5 mm double amplitude
300 m/s² (30 G) min.
-10° to 70°C at 60% RH max. (with no icing or condensation)
45% to 85% RH (at 5 to 35°C)
10,000 detent operations min.
2,000 detent operations min.
Cone: Approx. 0.8 g
Flat: Approx. 0.7 g
Extended shaft: Approx. 0.8g
Thumbwheel: Approx. 1.0g
Sealed Rotary DIP Switch A6A 285