OV8830 Datasheet, PDF (2/2 Pages) OmniVision Technologies, Inc. – OV8830 8-megapixel product brief

Applications
¬ Cellular and Mobile Phones
¬ Digital Still Cameras (DSC)
¬ Digital Video Camcorders (DVC)
¬ PC Multimedia
Product Features
¬ 1.4 µm OmniBSI-2™ technology
¬ 2/4-lane MIPI serial output interface
¬ support scalar, 2x2 binning,
re-sampling filter
¬ supports alternate row HDR timing
¬ embedded 4K bits one-time
programmable (OTP) memory
¬ supports horizontal and
vertical subsampling
¬ supports images sizes: 8MP, 6MP,
EIS1080p, 1080p, EIS720p,
EISQ 1080p, Q1080p, EISVGA, VGA,
QVGA, etc.
¬ standard serial SCCB interface
¬ two on-chip phase lock loop (PLL)
¬ context switching
¬ programmable I/O drive capability
¬ image quality controls: 2D-DPC
¬ built-in 1.2V regulator for core
and lens shading correction
¬ built-in temperature sensor
¬ automatic black level calibration (ABLC)
¬ programmable controls for frame rate,
mirror and flip, cropping, windowing,
and scaling
Functional Block Diagram
OV8830
Ordering Information
¬ OV08830-G04A
(color, chip probing, 200 µm backgrinding, reconstructed wafer with good die)
¬ OV08830-G20A
(color, chip probing, no backgrinding, no die-saw, whole wafer)
Product Specifications
¬ lens size: 1/3.2"
¬ active array size: 3264 x 2448
¬ output formats: 10-bit RAW RGB
¬ lens chief ray angle: 27° non-linear
¬ standard module size: 8.5 x 8.5 x 6 mm
¬ maximum image transfer rate:
- 8MP: 24 fps
- EIS1080p: 30 fps
- EIS720p: 60 fps
¬ power supply:
- core: 1.14 ~ 1.32V for up to
700 Mbps/lane or 1.27 ~ 1.32V
for up to 1 Gbps/lane MIPI
(internal regulator optional)
- analog: 2.6 ~ 3.0V
- I/O: 1.7 ~ 3.0V
¬ power requirements:
- active: 155 mA (291 mW*)
- standby: 300 µA
- XSHUTDOWN: 10 µA
¬ temperature range:
- operating: -30°C to 85°C junction
temperature
- stable image: 0°C to 60°C junction
temperature
¬ input clock frequency: 6 ~ 27 MHz
¬ sensitivity: 824 mV/lux-sec**
¬ scan mode: progressive
¬ pixel size: 1.4 µm x 1.4 µm
¬ image area: 4592 µm x 3450 µm
¬ die dimensions: 6410 µm x 5940 µm
* If the internal regulator is used, a higher power consumption of 339 mW with DOVDD = 1.8V is achieved.
** Pixel performance shown is a target value. This value is subject to change based on real measurements.
image sensor core
column
sample/hold
OV8830
image sensor
processor
image output
interface
image
array
AMP
10-bit
ADC
MCP/N
MDP/N[3:0]
temperature
sensor
gain
control
timing generator
and system control logic
PLL PLLs
control register bank
SCCB interface
4275 Burton Drive
Santa Clara, CA 95054
USA
Version 1.6, August, 2012
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered
trademarks of OmniVision Technologies, Inc. OmniBSI-2 is a trademark of OmniVision
Technologies, Inc. All other trademarks are the property of their respective owners.