KBPC5010 Datasheet, PDF (1/2 Pages) Olitech Electronics Co.Ltd – SILICON BRIDGE RECTIFIERS

Email: [e-mail]
KBPC50005 THRU KBPC5010
Website: www.olitech-elec.com
SILICON BRIDGE RECTIFIERS
VOLTAGE RANGE
CURRENT
50 to1000 Volts
50.0 Ampere
FEATURES
• The plastic package carries Underwriters Laboratory
• Flammability Classification 94V-0
• Ideal for printed circuit boards
• Low reverse leakage
• High forward surge current capability
• _{High temperature soldering guaranteed:}
260 C/10 seconds,at 5 lbs. (2.3kg) tension
MECHANICAL DATA
• _{Case:Metal case}
• Terminals : Plated 0.25” (6.35mm)lug.
• Polarity : Polarity symbols marked on case
• Mounting :Thru hole for #8 screw,20in.-lbs. torque max.
• Weight :1.02 ounce, 29 grams
KBPC25
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
.452 _MAX.
(11.5)
0.480(12.2)
0.425(10.8)
HOLE FOR
NO.8 SCREW
0.732(18.6)
0.692(17.6)
AC
+
-
AC
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
0.582(14.8)
0.543(13.8)
0.033x0.250
(0.8x6.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Dimensions in inches and (millimeters)
• _{Ratings at 25 C ambient temperature unless otherwise specified.}
• Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load current derate by 20%.
SYMBOLS
KBPC
50005
KBPC
5001
KBPC
5002
KBPC KBPC
5004
5006
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=50 C (Note 1,2)
VRRM
50
100 200 400 600
VRMS
35
70 140 280 420
VDC
50
100 200 400 600
I(AV)
50
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
400.0
Rating for Fusing(t<8.3ms)
I²t
664
Maximum instantaneous forward voltage dorp
per bridge element at 17.5A
VF
1.1
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
IR
Isolation voltage from case to leads
VISO
Typical Thermal Resistance (Note 2)
RθJA
Operating junction temperature range
TJ
storage temperature range
TSTG
10
1.0
2500
2.0
-65 to +150
-65 to +150
NOTES:
1.Unit mounted on 9” x 3.5” x4.6” thick(23cmx9cmx11.8cmcm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
KBPC
5008
800
560
800
KBPC
5010
1000
700
1000
UNITS
VOLTS
VOLTS
VOLTS
Amps
Amps
A²s
Volts
µA
mA
VAC
C/W
C
C
OLITECH ELECTRONICS CO. LTD.
Page 1 - 2