GP02-20A Datasheet, PDF (1/2 Pages) Olitech Electronics Co.Ltd – High Voltage 1.0A Sintered Glass Passivated Rectifie

Email: [e-mail] Website: www.olitech-elec.com
GP02-12A THRU GP02-20A
High Voltage 1.0A Sintered Glass Passivated Rectifie
VOLTAGE RANGE
CURRENT
1200 to 2000 Volts
1.0 Ampere
FEATURES
• _{GPRC ( Glass Passivated Rectifier Chip ) inside}
• _{Glass passivated cavity - free junction}
• _{Capable of meeting environmental standards of MIL-S-19500}
• _{1.0A operation at TA=75°C and 55°C with no thermal runaway}
• _{Plastic package has Underwriters Laboratory Flammability Classification 94V-0}
• High temperature soldering guaranteed:
260 C/10 seconds,0.375”(9.5mm) lead length, _{5 lbs. (2.3kg) tension}
• RoHS Compliance
DO-41
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160(4.1)
MECHANICAL DATA
• _{Case : JEDEC DO-41 molded plastic over glass body}
• Terminals _{: Plated axial leads, solderable per MIL-STD-750,} Method 2026
• Polarity _{: Color band denotes cathode end}
• Weight :0.012 ounce, 0.33 grams(DO-41)
0.034 (0.86)
0.028 (0.70)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• _{Ratings at 25 C ambient temperature unless otherwise specified.}
• Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS GP02-12A GP02-15A GP02-18A
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375”(9.5mm) lead length (see fig.1)
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0 A
Maximum DC reverse current TA=25 C
at rated DC blocking voltage TA=100 C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
VRRM
VRMS
VDC
I(AV)
1200
840
1200
IFSM
VF
IR
trr
CJ
RθJA
TJ,TSTG
1500
1050
1500
1.0
1800
1260
1800
30.0
2.0
5.0
50.0
2.0
3.0
130.0
-65 to +175
Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1MHz and applied reverse voltage of 4.0V.
3.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
GP02-20A
2000
1400
2000
UNITS
VOLTS
VOLTS
VOLTS
A
Amps
Volts
µA
uS
pF
C/W
C
OLITECH ELECTRONICS CO. LTD.
Page:P2-P1