2W005A Datasheet, PDF (1/2 Pages) Olitech Electronics Co.Ltd – 2.0 A Single-Phase Silicon Bridge Rectifier

Email: [e-mail] Website: www.olitech-elec.com
2W005A thru 2W10M
2.0 A Single-Phase Silicon Bridge Rectifier
Rectifier Reverse Voltage 50 to 1000V
8.1 ⁺ 0.5
Features
5.35 ⁺ 0.25
This series is UL listed under the Recognized
Component Index, file number E142814
The plastic material used carries Underwriters Laboratory
flammability recognition 94V-0
Ideal for printed circuit board mounting
High surge current capability
High temperature soldering guaranteed 265 /10
seconds at 5 lbs (2.3kg) tension
Mechanical Data
Case: Reliable low cost construction utilizing
molded plastic technique
Terminals: Plated leads solderable per MIL-STD-202,
Method 208
Mounting Position: Any
Weight: 0.05 ounce, 1.3 grams (approx)
29.5 MIN
24.5 MIN
5.1 ⁺ 0.5
5.1 ⁺ 0.5
Dimensions in millimeters(1mm =0.0394
Maximum Ratings & Thermal Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS bridge input voltage
Maximum DC blocking voltage
Maximum average forward rectified
output current at TA=25 C
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing ( t<8.3ms)
Typical thermal resistance per element(1)
Typical junction capacitance per element(2)
Operating junction and storage temperature
range
Symbol 2W005A ^2W01B 2W02D 2W04G 2W06J 2W08K ^2W10M unit
VRRM 50 100 200 400 600 800 1000 _V
VRMS 35
70 140 280 420 560 700 _V
VDC 50 100 200 400 600 800 1000 _V
IF(AV)
2.0
A
IFSM
I ²t
ReJA
Cj
TJ,
TSTG
60
15
50.0
30
-55 to + 150
A
A²sec
C/W
pF
Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz.
For Capacitive load derate by 20 %.
Parameter
Symbol ^{2W005A 2W01B 2W02D 2W04G 2W06J 2W08K 2W10M}Unit
Maximum instantaneous forward voltage drop
per leg at 2.0A
VF
1.1
V
Maximum DC reverse current at rated TA =25 C
DC blocking voltage per element TA =100 C
IR
10
1000
A
Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board mounting.
(2)Measured at 2.0MHz and applied reverse voltage of 4.0 volts.
OLITECH ELECTRONICS CO. LTD.
Page:P2-P1