MSC2121A Datasheet, PDF (31/77 Pages) OKI electronic componets – 14.4 kbps Full Duplex Modem Chip Set With Built-in Protocols

¡ Semiconductor
FEDL2121A-02
MSC2121A
Command
Function
Initial
Value
)Mn
Sets the variation of the transmission level during communication.
n = 0 DCE does not change the transmission level during
communication.
n = 1 DCE changes the transmission level during communication
according to the line conditions.
0
If the DCE is used in a mobile telephone, etc., the
demodulation state information of the remote modem is
received and, based on that information, the transmission
level is changed to one most suitable for the remote modem.
Note: If n is omitted, it is interpreted as n = 0.
Remarks
A-21