ML60851D Datasheet, PDF (27/82 Pages) OKI electronic componets – USB Device Controller

1Semiconductor
PEDL60851D-01
ML60851D
Interrupt Enable Register (INTENBL)
Read address
DBh
Write address
5Bh
D7 D6 D5 D4 D3 D2 D1 D0
After a hardware reset 0
0
0
0
0
0
0
1
After a bus reset
The previous value is retained
Definition
Setup ready Interrupt Enable
EP1
Packet Ready
Interrupt Enable
EP2
Packet Ready
Interrupt Enable
EP0
Receive Packet
Ready Interrupt Enable
EP0
Transmit Packet
Ready Interrupt Enable
USB Bus Reset Interrupt Enable
Suspend State Interrupt Enable
EP3 Packet Ready Interrupt Enable
The interrupts that can be accepted are set in this register. It is possible to change the setting of interrupt enable or
disable dynamically depending on the operating conditions. There is a correspondence between this register the
interrupt status register described next in terms of the bit numbers and the corresponding interrupt factors.
27/82