MS82V16520A Datasheet, PDF (19/40 Pages) OKI electronic componets – 262,144-Word × 32-Bit × 2-Bank SGRAM

OKI Semiconductor
FEDS82V16520A-01
MS82V16520A
DC Characteristics
Parameter
Symbol
Test Condition
CKE
Other
MS82V16520A-7 MS82V16520A-8
Unit Note
Min. Max. Min. Max.
Output High Voltage
V_OH
—
I_OH= –2.0 mA 2.4 — 2.4 — V
Output Low Voltage
V_OL
—
I_OL= 2.0 mA — 0.4 — 0.4 V
Input Leakage Current
I_LI
—
—
–10 10 –10 10 µA
Output Leakage Current
I_LO
—
—
–10 10 –10 10 µA
Operating Current
(1 Bank)
t_CK = min.
I_CC1 CKE ≥ V_IH t_RC = min.
No Burst
— 190 — 170 mA 1, 2
Precharge Standby Current in ^{ICC2P CKE ≤ VIL}
t_CK = min.
—
2
—
2 mA 3
Power Down Mode
I_CC2PS CKE ≤ V_IL
CLK ≤ V_IL
t_CK = ∞
—
2
—
2 mA 2
Precharge Standby Current in
Non Power Down Mode
I_CC2N
I_CC2NS
CKE ≥ V_IH
CKE ≥ V_IH
CS ≥ V_IH
t_CK = min.
CLK ≤ V_IL
t_CK = ∞
— 40 — 40 mA 2
— 20 — 20 mA
Active Standby Current in
Power Down Mode
I_CC3P CKE ≤ V_IL
t_CK = min.
—
3
—
3 mA 3
I_CC3PS CKE ≤ V_IL
CLK ≤ V_IL
t_CK = ∞
—
3
—
3 mA 3
Active Standby Current in Non
Power Down Mode
I_CC3N
I_CC3NS
CKE ≥ V_IH
CKE ≥ V_IH
CS ≥ V_IH
t_CK = min.
CLK ≤ V_IL
t_CK = ∞
— 50 — 50 mA 3
— 30 — 30 mA 3
Operating Current
(Burst Mode)
I_CC4 CKE ≥ V_IH t_CK = min.
— 240 — 200 mA 1, 2
Refresh Current
I_CC5 CKE ≥ V_IH t_RC ≥ min.
— 170 — 150 mA
Self Refresh Current
I_CC6 CKE ≤ 0.2V
—
— 3 — 3 mA
Notes 1. The maximum value of power supply current is obtained with the output open.
2. Address and data are changed only one time during one cycle.
3. Address and data are changed only one time during two cycles.
19/40