UFTC-7CN01 Datasheet, PDF (1/1 Pages) OKI electronic componets – UFTC Tip Cartridges for Metcal UltraFineTMHand-piece

UFTC Tip Cartridges for Metcal UltraFine^TM Hand-piece NEW
UFTC-7CN01
UltraFine^™ Tip Cartridge, Conical
0.13mm x 5.1mm (0.005" x 0.2")
UFTC-7CN02
UltraFine^™ Tip Cartridge, Conical
0.2mm x 5mm (0.01" x 0.2")
UFTC-7CN04
UltraFine^™ Tip Cartridge, Conical
0.4mm x 5mm (0.02" x 0.2")
UFTC-7CNL04
9
UltraFine^™ Tip Cartridge, Conical,
Long 0.4mm x 9mm (0.02" x 0.31")
UFTC-7CNB02
UltraFine^™ Tip Cartridge, Conical, Bent
0.2mm x 5.5mm (0.01" x 0.22")
UFTC-7CNB04
UltraFine^™ Tip Cartridge, Conical, Bent
0.4mm x 5.5mm (0.02" x 0.22")
UFTC-7CH08
UltraFine^™ Tip Cartridge, Chisel
0.8mm x 5.1mm (0.03" x 0.2")
UFTC-7CH12
UltraFine^™ Tip Cartridge, Chisel
1.2mm x 5mm (0.05" x 0.2")
UFTC-7CHL06
UltraFine^™ Tip Cartridge, Chisel, Long
0.6mm x 9mm (0.024" x 0.35")
UFTC-7CHL08
UltraFine^™ Tip Cartridge, Chisel, Long
0.8mm x 9mm (0.03" x 0.35")
UFTC-7DRH408
UltraFine^™ Tip Cartridge, Hoof, Micro
0.8mm x 5.1mm (0.03" x 0.2")
UFTC-7DRH412
UltraFine^™ Tip Cartridge, Hoof, Micro
1.2mm x 5.1mm (0.048" x 0.2")
UFTC-7CH06
UltraFine^™ Tip Cartridge, Chisel
0.6mm x 5.1mm (0.024" x 0.2")
7 = 700 Series for most standard applications. UFTC Tip Cartridges are only available in 700 Series
STDC Desolder Cartridges for Desoldering Hand-piece
The Metcal MX-DS1 Desoldering Hand-piece provides exceptional ability for safely desoldering through-hole components.
The high-mass STDC cartridges store a high volume of heat while maintaining a non-damaging constant temperature.
Coupled with the MX-5000 power supply, heat is rapidly replenished, dynamically responding to the load conditions.
STDC-102!
STDC-103!
STDC-104!
STDC-105!
STDC-106!
STDC-107!
STDC-703L!!
STDC-704L!!
STDC-705L!!
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
ø A mm (")
0.64mm (0.025")
0.76mm (0.076")
1.02mm (0.04")
1.27mm (0.05")
1.52mm (0.06")
2.41mm (0.095")
0.76mm (0.03")
1.02mm (0.04")
1.27mm (0.05")
ø B mm (")
1.40mm (.055")
1.68mm (.066")
1.78mm (.070")
2.03mm (.080")
2.29mm (.090")
3.18mm (.125")
1.68mm (.066")
1.79mm (.070")
2.03mm (.080")
Standard
Long Reach
0.400"
! 1 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. 0 = 600 Series also available for temperature sensitive
applications. To order these series, replace 1 with 8 or 0.
!! 7 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. To order this series, replace 7 with 8.
Download the Surface Mount Removal Techniques using MX-5000 Soldering and Rework System technical note from
www.metcal.com
10