|
MSM9200-XX Datasheet, PDF (1/34 Pages) OKI electronic componets – 5 X 7 Dot Character X 16-Digit Display Controller/Driver with Character RAM | |||
|
E2C0035-27-Y4
¡ ¡ SemiconSduectomr iconductor
This versionM: NSMov9.210909-7xx
Previous version: Jul. 1996
MSM9200-xx
5 ¥ 7 Dot Character ¥ 16-Digit Display Controller/Driver with Character RAM
GENERAL DESCRIPTION
The MSM9200-xx is a dot matrix vacuum fluorescent display tube controller driver IC which
displays characters, numerics and symbols.
Dot matrix vacuum fluorescent display tube drive signals are generated by serial data sent from
a microcontroller. A display system is easily realized by internal ROM and RAM for character
display.
The MSM9200-xx has low power consumption because it is munufactured in CMOS process
technology.
-01 and -02 are available as general codes.
Custom codes are provided if necessary.
FEATURES
⢠Logic power supply (VDD)
⢠Fluorescent display tube drive power supply (VDISP)
⢠Fluorescent display tube drive power supply (VFL)
⢠VFD driver output current
: 3.3 V±10%/5.0 V±10%
: 3.3 V±10%/5.0 V±10%
: â20 to â60 V
(VFD driver output can directly be connected to the fluorescent display tube. No pull-down
resistor is required.)
- Segment driver (SEG1 to SEG35)
- Segment driver (AD1 to AD8)
- Grid driver (COM1 to COM16)
⢠General output port output current
: â5 mA
: â10 mA
: â30 mA
(VFL=â60V)
(VFL=â60V)
(VFL=â60V)
- Output driver (P1-4)
⢠Content of display
: ±1 mA (VDD=3.3V±10%)
±2 mA (VDD=5.0V±10%)
- CGROM 5Â¥7 dots, 224 types
(character data)
- CGRAM 5Â¥7 dots, 32 types
(character data)
- ADRAM 16 (display digit) ¥8 bits (symbol data)
- DCRAM 64 (stored digit) ¥8 bits (register for character data display)
- General output port
4 bits (static mode)
⢠Display control function
- Display digit
: 1 to 16 digits
- Display duty (contrast adjustment) : 16 stages
- Display blink position specification : Blinking time is input externally
- Display shift (left and right)
: Can be set only for SEG output
- All lights ON/OFF
⢠4 interfaces with microcontroller
: DA, CS, CP, and BLINK (5 interfaces when RESET is
added)
⢠1 byte instruction execution (excluding data write to RAM and display blink position
specification)
⢠Oscillation circuit included (external C and R)
⢠Package:
80-pin plastic QFP (QFP80-P-1414-0.65-K) (Product name: MSM9200-xxGS-K)
xx indicated the code number.
1/34
|
▷ |