|
MSM7716 Datasheet, PDF (1/22 Pages) OKI electronic componets – Single Rail Linear CODEC | |||
|
E2U0043-28-82
¡ ¡ SemicondSucetormiconductor
MSM7716
Single Rail Linear CODEC
This version: AMugS.M19797816
Previous version: Nov. 1996
GENERAL DESCRIPTION
The MSM7716 is a single-channel CODEC CMOS IC for voice signals that contains filters for
linear A/D and D/A conversion.
Designed especially for a single-power supply and low-power applications, the device is
optimized for applications for the analog interfaces of audio signal processing DSPs and digital
wireless systems.
The analog output signal can directly drive a ceramic type handset receiver. In addition, levels
for analog outputs can be set by external control.
FEATURES
⢠Single power supply
: +2.7 V to +3.6 V
⢠Low power consumption
Operating mode
: 24 mW Typ.
Power down mode
: 0.05 mW Typ.
⢠Digital signal input/output interface : 14-bit serial code in 2's complement format
⢠Sampling frequency(fs)
: 4 to 16 kHz
⢠Transmission clock frequency
: fs ¥ 14 min., 2048 kHz max.
⢠Filter characteristics
: when fs = 8 kHz, complies with ITU-T Recommen-
dation G. 714
⢠Built-in PLL eliminates a master clock
⢠Two input circuits in transmit section
⢠Two output circuits in receive section
⢠Transmit gain adjustable using an external resistor
⢠Receive gain adjustable by external control 8 steps, 4 dB/step
⢠Transmit mic-amp is eliminated by the gain setting of a maximum of 36 dB.
⢠Analog outputs can drive a load of a minimum of 1 kW ; an amplitude of a maximum of 4.0 VPP
with push-pull driving.
⢠Built-in reference voltage supply
⢠Package options:
32-pin plastic TSOP (TSOPI32-P-814-0.50-1K) (Product name : MSM7716TS-K)
30-pin plastic SSOP (SSOP30-P-56-0.65-K) (Product name : MSM7716GS-K)
1/22
|
▷ |