|
MSC7128 Datasheet, PDF (1/27 Pages) OKI electronic componets – 5 x 7-Dot Character x 16-Digit Display Controller/Driver | |||
|
E2C0029-27-Y4
¡ ¡ SemicondSucetormiconductor
MSC7128-xx
5 ¥ 7-Dot Character ¥ 16-Digit Display Controller/Driver
This version:MNSoCv7.112989-7xx
Previous version: Jul. 1996
GENERAL DESCRIPTION
The MSC7128-xx is a general purpose display controller for vacuum fluorescent display tube.
The MSC7128-xx drives displays with up to 35 anodes (dots) and up to 16 grids (characters) plus
a cursor.
The controller accepts command and display data input words on a clocked serial input line.
Commands control the on/off duty cycle, starting character position, number of characters to
display and display modes (PLA mode and Lamp Test mode). An internal PLA-type character
generator provides character decoding and dot pattern generation for the full 128 characters.
A 35 ¥ 128-bit PLA (ROM) code is programmable.
FEATURES
⢠Logic supply voltage (VDD)
⢠VF driver supply voltage (VEE)
⢠Driver output current
:+5V
:â55V
â VF grid driver
:â30mA
â VF anode driver
:â2mA
â VF cursor driver
:â10mA
⢠Direct drive capability for vacuum fluorescent display (no pull-down resistor is required)
⢠Built-in oscillation circuit
⢠Built-in power-on-reset circuit with external C
⢠Serial host interface (data in, clock, chip select)
⢠Serial data input for 8-bit control and display data words
⢠Command functions
â On/off duty cycle
: 0/16 to 15/16
â Character display position : 0 to 15
â Number of display digits :1 to 16
â Display modes
: PLA mode, and Lamp Test mode
⢠Built-in 35 x 128-bit PLA-type character generator
â Character font
:5 ¥ 7
â Number of characters
:128
â Programmable PLA code
⢠Package options:
64-pin plastic SDIP (SDIP64-P-750-1.78) (Product name : MSM7128-xxSS)
64-pin plastic QFP (QFP64-P-1420-1.00-BK) (Product name : MSM7128-xxGS-BK)
xx indicates the code number.
1/27
|
▷ |