MSC1230 Datasheet, PDF (1/13 Pages) OKI electronic componets – 111-Bit 2/3-Duty Controller/Driver with Digital Dimming Function

E2C0024-27-Y4
¡ _¡ Semicond_Suc_etor_miconductor
This version: N_Mov_S. _C19₁9₂7₃₀
Previous version: Jul. 1996
MSC1230
111-Bit 2/3-Duty Controller/Driver with Digital Dimming Function
GENERAL DESCRIPTION
The MSC1230 is a Bi-CMOS display driver with digital dimming function. It enables switching
between 1/3-duty vacuum fluorescent (VF) display tube and universal VF display tube by pin
control.
The MSC1230 consists of a 112-bit shift register, a 111-bit latch, a 10-bit digital dimming circuit,
37 segment drivers, and 3 grid drivers.
The MSC1230 provides an interface with a microcomputer only by three signal lines: CS,
DATA-IN, and CLOCK.
By using the chip select function, the DATA-IN and CLOCK signal lines can be shared
by other peripheral circuits.
FEATURES
• Power supply voltage
• Operating temperature range
: V_DD=8 V to 18 V (built-in 5 V regulator for logic circuit)
: Ta=–40 °C to +85 °C
• 37-segment driver outputs
: I_OH=–6 mA at V_OH = V_DD –0.8 V
• 3-grid driver outputs
: I_OH=–30 mA at V_OH = V_DD –0.8 V
• Built-in digital dimming circuit (10-bit resolution)
• Switchable between 1/3-duty VF display tube and universal VF display tube*
When SEL pin is left open : Selects universal VF display tube (The grids GRID1, GRID2,
and GRID1+GRID2 are turned on repeatedly in this order)
When SEL pin is used at 0 V : Selects 1/3-duty VF display tube (The grids GRID1, GRID2,
and GRID3 are turned on repeatedly in this order)
• Built-in oscillation circuit (external R and C)
• Built-in Power-On-Reset circuit
• Package:
56-pin plastic QFP (QFP56-P-910-0.65-2K)(Product name: MSC1230GS-2K)
* A universal VF display tube is a display tube for which, like a gate array, the user can freely
design characters and patterns on the master layer (grid). (Pattern can be created without gaps
between grids.)
Since the outline dimensions of the display tube and the grid layout are predetermined,
desired patterns can be displayed in a short time.
The universal VF display tube is used for the display parts for audio equipment, household
appliances, and automobile equipment.
1/13