|
ML9222 Datasheet, PDF (1/25 Pages) OKI electronic componets – 32-Bit Duplex/Triplex VFD Controller/Driver with Digital Dimming, ADC and Keyscan | |||
|
FEDL9222-02
FEDL9222-02
¡ ¡ SemiconSduectomr iconductor
ML9222
This version: FebM. 2L0902022
Previous version: Nov. 1999
32-Bit Duplex/Triplex VFD Controller/Driver with Digital Dimming, ADC and Keyscan
GENERAL DESCRIPTION
The ML9222 is a full CMOS controller/driver for Duplex or Triplex vacuum fluorescent display
tube. It conststs of 32-segment driver outputs and 3-grid pre-driver outputs, so that it can drive
directly up to 96-segment VFD.
ML9222 features a digital dimming function, a 8-ch ADC, a 5 ¥ 5 keyscan circuit and an encoder
type switch interface.
ML9222 provides an interface with a microcontroller only by four signal lines: DATA I/O,
CLOCK, CS and INT.
FEATURES
⢠Supply voltage (VDD)
⢠Duplex/Triplex selectable
: 8 to 18.5V (Built-in 5V regulator for logic)
⢠Applicable VFD tube
: 2 Grids ¥ 32 Anodes VFD tube
: 3 Grids ¥ 32 Anodes VFD tube
⢠32-segment driver outputs
: IOH=â5mA at VOH=VDDâ0.8V (SEG1 to 22)
IOH=â10mA at VOH=VDDâ0.8V (SEG23 to 32)
⢠3-grid pre-driver outputs
: IOL=10mA at VOL=2V
⢠Built-in digital dimming circuit (10-bit resolution)
⢠Built-in 8-ch A/D converter
⢠Built-in 5 ¥ 5 keyscan circuit
⢠3 interface circuits for an encoder type rotary switch
⢠Built-in oscillation circuit (external R and C)
⢠Built-in Power-On-Reset circuit
⢠Package:
80-pin plastic QFP (QFP80-P-1420-0.80-BK) Product name: ML9222GA
1/25
|
▷ |