|
ML9204 Datasheet, PDF (1/41 Pages) OKI electronic componets – 5 X 7 Dot Character X 24-Digit X 2-Line Display Controller/Driver with Character RAM (Built-in Key Scan) | |||
|
OKI Semiconductor
ML9204-xx
PEDL9204-02
Issue Date: Oct. 12, 2004
Preliminary
5 à 7 Dot Character à 24-Digit à 2-Line Display Controller/Driver with Character RAM (Built-in Key Scan)
GENERAL DESCRIPTION
The ML9204-xx is a 5 Ã 7 dot matrix type vacuum fluorescent display tube controller driver IC which displays
characters, numerics and symbols of a maximum of 24 digits à 2 lines.
Dot matrix vacuum fluorescent display tube drive signals are generated by serial data sent from a
micro-controller. A display system is easily realized by internal ROM and RAM for character display.
Built-in key scan for 3-channel encoder type rotary switch and 5 Ã 6 matrix key switch allow the user to receive
each switch input.
The ML9204-xx has low power consumption since it is made by CMOS process technology.
â01 is available as a general-purpose code.
Custom codes are provided on customerâs request.
FEATURES
⢠Logic power supply (VDD)
: 3.3 V±10% or 5.0 V±10%
⢠VFD tube drive power supply (VSEG, VCOM ) : 20 to 60 V
⢠VFD driver output current
(VFD driver output can be connected directly to the VFD tube. No pull-down resistor is required.)
⢠Segment driver (SEGA1 to A35, SEGB1 to B35)
Only one driver output is high
All the driver outputs are high
⢠Segment driver (ADA, ADB)
⢠Grid driver (COM1 to 24)
: â5 mA (VSEG = 60 V)
: â350 mA (VSEG = 60 V)
: â15 mA (VSEG = 60 V)
: â25 mA (VCOM = 60 V)
⢠Content of display
SEGA1 to SEGA35 and ADA
⢠CGROM_A
: 5 Ã 7 dots 240 types (character data)
⢠CGRAM_A
: 5 Ã 7 dots 16 types (character data)
⢠ADRAM_A
: 24 (display digit)Ã 1 bit (symbol data; can be used for a cursor.)
⢠DCRAM_A
: 24 (display digit) Ã 8 bits (register for character data display)
SEGB1 to SEGB35 and ADB
⢠CGROM_B
: 5 Ã 7 dots 240 types (character data)
⢠CGRAM_B
: 5 Ã 7 dots 16 types (character data)
⢠ADRAM_B
: 24 (display digit)Ã 1 bit (symbol data; can be used for a cursor.)
⢠DCRAM_B
: 24 (display digit) Ã 8 bits (register for character data display)
⢠Display control function
⢠GCRAM
: Simultaneous output of COM1 to 24 can be set in 1 grid.
⢠Display digits
: 1 to 24 digits (9- to 24-bit arbitrary setting)
⢠Display duty (brightness adjustment) : 0/1024 to 960/1024 stages
⢠All lights ON/OFF
⢠5 interfaces with microcontroller:DI/O, CS, CP, RESET, INT
⢠Built-in key scan circuit for 5 à 6 matrix key switch
⢠Built-in key scan circuit for 3-channel encoder type rotary switch
⢠Built-in oscillation circuit
Crystal oscillation or ceramic oscillation: 4.0 MHz (Typ)
⢠Standby function
Inhibiting the oscillator circuit provides low power consumption.
⢠Package options:
128-pin plastic QFP (QFP128-P-1420-0.50-K) (ML9204-xxGA)
1/41
|
▷ |