|
ML9092-01 Datasheet, PDF (1/66 Pages) OKI electronic componets – LCD Driver with Key Scanner and RAM | |||
|
OKI Semiconductor
ML9092-01/02/03/04
LCD Driver with Key Scanner and RAM
FEDL9092-01
Issue Date: Nov. 4, 2003
GENERAL DESCRIPTION
The ML9092-01/02/03/04 are LCD drivers that have internal RAM and a key scan function. They are best suited
for car audio displays.
Since 1-bit data of the display data RAM corresponds to the light-on or light-off of 1-dot of the LCD panel (a bit
map system), a flexible display is possible.
A graphic display system of a maximum of 60 Ã 10 dots (56 Ã 10 dots for ML9092-01, 60 Ã 10 dots for
ML9092-02/03/04). can be implemented.
The ML9092-01/02 do not require any power supply circuit to drive the LCD, because they have internal voltage
doublers. (If a large-sized panel is driven, use the ML9092-03, to which the LCD driving voltage is supplied
externally.)
The internal key scan circuit (5 Ã 5 key scanning for ML9092-01/04, 6 Ã 4 key scanning for ML9092-02/03) has
eliminated the needs of key scanning by the CPU, thereby enabling the efficient use of the CPU ports.
FEATURES
⢠Logic voltage
: 4.5 to 5.5 V
⢠LCD drive voltage
: 4.5 to 16.5 V (positive voltage)
⢠Segment output
: 56 outputs for ML9092-01; 60 outputs for ML9092-02/03/04
⢠Common output
: 10 outputs
⢠Built-in bit-mapped RAM : 60 à 10 = 600 bits (for ML9092-01 only: 56 à 10 = 560 bits for the RAM
display area)
⢠4-pin serial interface with CPU: CS, CP, DI/O, KREQ
⢠Built-in LCD drive bias resistors
⢠Built-in voltage doubler circuit
⢠For the ML9092-01/04, the built-in 5 à 5 key scanner makes it possible to read the status of 25 key switches and
1-channel rotary encoder. In addition, the ML9092-01/04 have an 8-bit, 3-channlel PWM circuit built in.
For the ML9092-02/03, the built-in 6 Ã 4 key scanner makes it possible to read the status of 24 key switches and
1-channel rotary encoder.
⢠Port A output
: 1 pin, output current = â15 mA : Can be used for LED driving
⢠Port B output
: 3 pins, output current = â2 mA : Applies to ML9092-01/04 (capable of PWM
output)
⢠Port C output
: 5 pin, output current = â2 mA : Applies to ML9092-01 only
⢠Port D output
: 5 pins, output current = â2 mA : Applies to ML9092-01 only
⢠Temperature range
: â40 to +85°C
⢠Package: 100-pin plastic TQFP (TQFP100-P-1414-0.50-K)
(Product name: ML9092-01TB, ML9092-02TB, ML9092-03TB, ML9092-04TB)
1/66
|
▷ |