|
ML9044A Datasheet, PDF (1/64 Pages) OKI electronic componets – DOT MATRIX LCD CONTROLLER DRIVER | |||
|
OKI Semiconductor
ML9044A-xxA/xxB
DOT MATRIX LCD CONTROLLER DRIVER
PEDL9044A-04
Issue Date: Apr. 8, 2002
Preliminary
GENERAL DESCRIPTION
The ML9044A used in combination with an 8-bit or 4-bit microcontroller controls the operation of a character type
dot matrix LCD.
FEATURES
⢠Easy interfacing with 8-bit or 4-bit microcontroller
⢠Switchable between serial and parallel interfaces
⢠Dot-matrix LCD controller/driver for a small (5 à 7 dots) or large (5 à 10 dots) font
⢠Built-in circuit allowing automatic resetting at power-on
⢠Built-in 17 common signal drivers and 120 segment signal drivers
⢠Built-in character generation ROM capable of generating 160 small characters (5 à 7 dots) or 32 large
characters (5 Ã 10 dots)
⢠Creation of character patterns by programming: up to 8 small character patterns (5 à 8 dots) or up to 4 large
character patterns (5 Ã 11 dots)
⢠Built-in RC oscillation circuit using external or internal resistors
⢠Program-selectable duties: 1/9 duty (1 line: 5 à 7 dots + cursor + arbitrator), 1/12 duty (1 line: 5 à 10 dots +
cursor + arbitrator), or 1/17 duty (2 lines: 5 Ã 7 dots + cursor + arbitrator)
⢠Built-in bias dividing resistors to drive the LCD
⢠Bi-directional transfer of segment outputs
⢠Bi-directional transfer of common outputs
⢠120-dot arbitrator display
⢠Line display shifting
⢠Built-in contrast control circuit
⢠Built-in voltage multiplier circuit
⢠Gold Bump Chip
With dummy bumps on both sides of the chip: ML9044A-xxA CVWA
Without dummy bumps on both sides of the chip: ML9044A-xxB CVWA
*xx indicates a character generator ROM code number.
*51A and 51B indicate general character generator ROM code numbers.
1/64
|
▷ |